 |
| Place of Origin: | America |
| Brand Name: | TYCO |
| Certification: | Ce |
| Model Number: | V23401-H1409-B101 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | 10*20*20cm |
| Delivery Time: | In stock |
| Payment Terms: | T/T, Western Union |
| Supply Ability: | 10000PCS/WEEK |
| Materia: | Iron | Color: | Gray |
|---|---|---|---|
| Diameter: | 50mm | Temperature: | 20-120 |
| TYCO: | TYCO | V23401-H1409-B101: | V23401-H1409-B101 |
| WIRE: | WIRES |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
| Model | Standard1 | Standard2 | Standard3 |
| Excitation Input | AC7Vrms 10kHz | ||
| Primary Side | R1 - R2 | ||
| Transformation Ratio | 0.286±10% | ||
| Electrical Error | 50'Max. | ||
| Input Impedance: Zro | 130Ω±20% |
||
V23401-H1409-B101
V23401-T2014-B209
V23401-T2G09-E202
V23401-H6009-B601
V23401-D1001-B114
V23401-T2002-B209
V23401-T2009-B202
V23401-T2014-B209
V23401-U1016-B110
V23401-T2014-E209
V23401-T2009-E202
V23401-U6119-B609
V23401-U6019-B609
V23401-S1201-C610
V23401-T2015-B201
V23401-H2009-B202
V23401-D1001-B114
V23401-D1001-B122
V23401-D1001-B101
V23401-D1001-B102
V23401-D1008-B114
V23401-D1008-B122
V23401-D1008-B101
V23401-D1008-B102
V23401-D1009-B114
V23401-D1009-B122
V23401-D1009-B101
V23401-D1009-B102
No encoder communication (LED flashing red once per second) Incorrect encoder parameterization, i.e. one of the programmed values is outside the limits. Typically, during re-parameterization of the encoder resolution (steps per revolution, measuring units per revolution“) the encoder’s total measuring range was not adapted correspondingly
Singleturn encoders The total measuring range of a singleturn encoder comprises exactly one complete or partial revolution, reason why the value in parameter “total measuring range” must always be the same as in parameter “measuring units per revolution
Multiturn encoders Multiturn encoders are capable of sensing max. 65536 revolutions (multivoPlus even 8192 revolutions). Maximum admissible value for the total measuring range is the result of “steps per revolution” multiplied by the encoder’s maximum number of revolutions (65536 respectively 8192). Once this value is exceeded in the parameterization this will result in an error signal (flashing LED) together with a “parameterization alarm” in the diagnostic data.
Any other, inferior value may be programmed as total measuring range. All encoders with PROFIBUS bus covers provide integrated endless operation ensuring admissible values for all resolutions and total measuring ranges even during overrun
Slave parameterization The master transmits a Slave Parameter Request (Set_Prm). By the parameterization data the slave is informed about actual bus parameters, monitoring times and slavespecific parameters. During the projecting process the parameters are directly or indirectly adopted by the GSD file. The slave compares these parameterization data with its own stored data.
Diagnosis request prior to data exchange The master transmits another Slave Diagnose Request (Slave_Diag), the slave responds by a Slave Diagnose Response. The master now verifies if parameterization and configuration coincide with the data stored in the slave. If the data requested by master is admissible and correct the slave signalizes its readiness for user data transfer via the diagnostic data.
