Gate control The opening and closing of the hardware gate (HW gate) and software gate (SW gate) defines the period of time during which the counting signals are acquired. evaluates the acquired encoder signals ... Read More
The digital on-board I/O supports the following functions: ● Reconfiguration in RUN You can reconfigure some of the technological functions in RUN mode of the CPU (for more information, refer to the section ... Read More
am tracks and probes as well as PLC open blocks for programming the motion control functionality. For more information about Motion Control, refer to the section Technology functions. For a detailed descrtion ... Read More
on the Web server, even for alarms related to drives. This information is available in RUN mode, but also in STOP mode of the CPU. The diagnostics information is updated automatically when you configure new ... Read More
Work memory (for data) 1 MB 1 MB Processing time for bit operations 60 ns 48 ns PU. Motion Control supports speed-controlled, positioning and synchronous axes (synchronizing without specification of the ... Read More
communication to a maximum value. You flatten peaks in the data feed. You share the remaining bandwidth based on demand. Display and Web serveBacking up and restoring via the displayr You can back up and ... Read More
You can find the SIMATIC Automation Tool on the Internet With PRONETA (PROFINET network analysis), you analyze the PROFINET network during commissioning. PRON The topology overview independently scans PROFINET ... Read More
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial security concept. ’ necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial ... Read More
STOP until the RUN/STOP LED lights up for the 2nd time and remains continuously lit (this takes hree seconds). After this, release the button. 3. Press the operating mode button STOP again within the next three ... Read More
speed specification • Positioning axis for position-controlled positioning of a drive ams, cam track for position-dependent generation of switching signals Synchronous axis to interconnect with a master value. ... Read More
