 |
| Place of Origin: | America |
| Brand Name: | TYCO |
| Certification: | CE |
| Model Number: | V23401-T2609-C302 |
| Minimum Order Quantity: | 1PCS |
|---|---|
| Packaging Details: | CARTON |
| Delivery Time: | IN STOCK |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 10000PCS/WEEK |
| Name: | Encoder | Temperature: | -50-120 |
|---|---|---|---|
| Material: | Iron | TYCO: | TYCO |
| V23401-T2609-C302: | V23401-T2609-C302 | WIRE: | 6 WIRES |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
V23401-T2609-C302
V23401-U6119-B609
V23401-U6019-B609
V23401-S1201-C610
V23401-H2009-B202
V23401-T2409-C502
V23401-T2509-C202
V23401-T2609-C302
V23401-T2014-E209
V23401-H2009-B202
V23401-T2409-C502
V23401-T2509-C202
V23401-T2609-C302
V23401-T2014-E209
V23401-T2629-E202
V23401-H1005-B001
V23401-T2509-C202
V23401-T2659-C302
V23401-T2669-C302
V23401-R3008-E101
V23401-S1201-B110
V23401-R3008-E101
V23401-D1001-B101
V23401-T2014-E209
V23401-T8002-B802
V23401-H2001-B202
V23401-D1001-B101
V23401-U7018-B709
| Size | Pairs of Poles(Speed) | Angular error range | |||||||
| ±4' | ±6' | ±7' | ±8' | ±10' | ±15' | ±20' | Transformation ratio | ||
| 15 | 1 | X | X | X | X | 0.5 | |||
| 3 | X | X | X | X | 0.5 | ||||
| 1 | X | X | X | X | 0.5 | ||||
| 1 | X | X | X | X | 0.5 | ||||
GSD file The device master data file (GSD file) describes all encoder data required for operation. Format and content are defined by standard EN 50170. The GSD file provides ident number 09F6 for all encoders described. The GSD file is an essential configuration tool for encoder parameterization and configuration
The GSD file provides two kinds of information: General information such as manufacturer’s name, product designation, ident number, PROFIBUS - specific parameters and Baud rates. Application-relevant information such as configuration options, parameters, parameter descriptions, hardware and software status and diagnostic possibilities.
| Input impedance Tolerance: ± 15 % |
Tolerance: ± 15 % |
Initializing, restart and user data communication Prior to any user data exchange between master and slave every slave is re-initialized. The master transmits parameterization and configuration data to the slave. Only if the parameterization and configuration data coincide with the data stored in the slave the user data exchange will be proceeded as follows: Diagnostic request by master The master transmits a Slave Diagnose Request (Slave_Diag), the slave responds by a Slave Diagnose Response. This way, the master verifies whether the slave exists in the bus and is ready for parameterization and configuration
| Tolerance: ± 15 % |
Slave parameterization The master transmits a Slave Parameter Request (Set_Prm). By the parameterization data the slave is informed about actual bus parameters, monitoring times and slavespecific parameters. During the projecting process the parameters are directly or indirectly adopted by the GSD file. The slave compares these parameterization data with its own stored data.
