TYCO V23401-H2014-B202 V23401-H2014-B202 V23401-H2014-B202 V23401-H2014-B202

 We can sell the products of TYCO at a advantage price

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

V23401-H2014-B202

V23401-H1009-B101

V23401-T1009-B102 

V23401-H1009-B102
V23401-T2001-B214

V23401-H2001-B214

V23401-T2001-B222 

V23401-H2001-B222
V23401-T2001-B201

V23401-H2001-B201

V23401-T2001-B202 

V23401-H2001-B202
V23401-T2009-B214

V23401-H2009-B214

V23401-T2009-B222 

V23401-H2009-B222
V23401-T2009-B201

V23401-H2009-B201

V23401-T2009-B202 

V23401-H2009-B202
V23401-T2010-B214

V23401-H2010-B214

V23401-T2010-B222 

V23401-H2010-B222
V23401-T2010-B201

V23401-H2010-B201

V23401-T2010-B202 

V23401-H2010-B202
V23401-T2014-B214

V23401-H2014-B214

V23401-T2014-B222 

V23401-H2014-B222
V23401-T2014-B201

V23401-H2014-B202

V23401-T2014-B202 

V23401-T2015-B214

V23401-T2009-B202

V23401-T2002-B209

Using a screen saver takes up processor time. This can lead to overload on the system. Defective screen savers that do not free up parts of the work memory significantly reduce the useable work memory.

During continuous operation, the usable work memory becomes badly fragmented after a time. To allow Windows to reorganize the work memory, the average utilization of the processor should be below 75 %. You can check the processor utilization in the Windows System Monitor. If you cannot achieve processor utilization less than 75 %, you should upgrade your computer

Using the Windows file system frequently can result in an unfavorable organization of the disk memory, e.g. if changed data are saved during commissioning. To avoid loss of performance, the hard disk drive should be optimized regularly

To allow the WinCC Runtime system to operate correctly, power management must be deactivated in the BIOS setup and in the Control Panel of Windows. If power management is activated, you may encounter problems when archiving process data and messages. The function can lead to a lack of resources when virtual memory is accessed. Fast reactions to operator input are then no longer possible

he Microsoft FindFast.exe application is used to accelerate searches for documents. When configuring with WinCC, it is possible that FindFast.exe takes up a considerable percentage of processor capacity. You should therefore remove Microsoft Indexing from the Autostart folder of the operating system.

To test a WinCC project in Runtime, first setup the project's applications and operator functions that available in Runtime. These project settings must be adjusted for every computer on which the project should run. Using the "Computer properties" dialog, which is opened from WinCC Explorer, you can make the following project settings

To test a WinCC project in Runtime, first setup the project's applications and operator functions that available in Runtime. These project settings must be adjusted for every computer on which the project should run. Using the "Computer properties" dialog, which is opened from WinCC Explorer, you can make the following project settings

Graphics Runtime" tab Change default settings for the use of process pictures in Runtime ● "Runtime" tab User-specific settings for all WinCC projects on this computer

A project must be opened.

Select the entry "Computer" in the navigation window of the WinCC Explorer. All computers that are available for the current project, will be displayed in the data window. 2. In WinCC Explorer's data window, double-click the desired computer. The "Computer Properties" dialog will open.

To test a WinCC project in Runtime, the local computer name must be entered as a computer name in the project. The computer name is changed on the "General" tab in the "Computer properties" dialog.