TYCO V23401-H2009-B202 V23401-H2009-B202 V23401-H2009-B202 V23401-H2009-B202

 We can sell the products of TYCO at a advantage price

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

V23401-H2009-B202

V23401-H2009-B202

The local time zone is displayed in the stations in Los Angeles, New York, and Tokyo. Data is collected from the stations in the center in Berlin. With the default setting, the operator sees all data in the local Berlin time. To be able to compare the data more easily in discussions with the stations, bus operators change over to UTC.

The use of UTC is always advisable when you want to display or edit time-dependent data from different time zones on one computer. If, for example, you want to display messages from different time zones on one client, UTC should be selected in the Alarm Control of this client so that the messages are sorted in the correct chronological order and appear correctly in the single-line message window.

For runtime displays, the following settings are available. The settings are configured in the properties of the computer on the "Parameters" ta

You can set the time base for communication with the automation system: ● UTC (Coordinated Universal Time) Default setting ● Local winter time (all year): Available for compatibility reasons The settings are configured in the properties of the computer on the "Parameters" tab

The display of time is specified by the time format hh:mm:ss. Only the additional display of milliseconds is optional for the components. The time display is then in the format hh:mm:ss.msc, e.g. 17:01:03.099.

onents. The time display is then in the format hh:mm:ss.msc, e.g. 17:01:03.099.

The time basis applicable as default setting for the entire project is entered in the Computer Properties dialog. This setting applies to all objects displayed on this computer in Runtime. The exceptions to this are objects for which you have set a separate time base. You may also use this dialog to set whether or not central date and time formatting according to ISO 8601 should be forced in all components.

You can also change the time base setting in Runtime. To update the display in Runtime, you must reselect the corresponding picture or report. If the central display of date and time in ISO 8601 format is forced, this takes effect on configurable time formats and time display throughout the project, e.g. in ActiveX Controls, Reports or in Alarm Logging on system message blocks Time and Date.

. Click the Computer component in the navigation window of the WinCC Explorer. WinCC displays the list of computers in the data window. 2. Select the computer and then click the Properties command in the shortcut menu. The Computer Properties dialog is opened. 3. Click the Parameters tab. 4. Select required time base in the Time Basis for Time Display in Runtime list box. 5. In the Central Date and Time Formatting area, choose if the format for date and time may be configured at individual components, such as Alarm Control, or if the format in accordance with ISO 8601 should be forced at all components. 6. Click "OK" to close the dialog.