 |
| Place of Origin: | America |
| Brand Name: | TYCO |
| Certification: | CE |
| Model Number: | V23401-T2009-B202 |
| Minimum Order Quantity: | 1PCS |
|---|---|
| Packaging Details: | CARTON |
| Delivery Time: | IN STOCK |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 10000PCS/WEEK |
| Material: | Iron | Name: | Encoder |
|---|---|---|---|
| Temperature: | -50-120 | V23401-T2009-B202: | V23401-T2009-B202 |
| Wire: | 6 Wires | Color: | Black |
| TYCO: | TYCO |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
V23401-T2009-B202
V23401-T2009-B214
V23401-H2009-B214
V23401-T2009-B222
V23401-H2009-B222
V23401-T2009-B201
V23401-H2009-B201
V23401-T2009-B202
V23401-H2009-B202
V23401-T2010-B214
V23401-H2010-B214
V23401-T2010-B222
V23401-H2010-B222
V23401-T2010-B201
V23401-H2010-B201
V23401-T2010-B202
V23401-H2010-B202
V23401-T2014-B214
V23401-H2014-B214
V23401-T2014-B222
V23401-H2014-B222
V23401-T2014-B201
V23401-H2014-B202
V23401-T2014-B202
V23401-T2015-B214
V23401-T2009-B202
V23401-T2002-B209
V23401-T2014-B209
V23401-T2014-E209
V23401-T2099-C502
| Model | Standard1 | Standard2 | Standard3 |
| Excitation Input | AC7Vrms 10kHz | ||
| Primary Side | R1 - R2 | ||
| Transformation Ratio | 0.286±10% | ||
| Electrical Error | 60'Max. | ||
| Input Impedance: Zro | 120Ω±20% | ||
Device-specific parameters Code sequence Behaviour of the position data in relation to the sense of rotation of the encoder shaft when looking at flange. CW („clockwise“) = Ascending values with clockwise rotation CCW („counter-clockwise“) = Ascending values with counter-clockwise rotation Class 4 functionality If active („enabled“), the encoder operates as a Class 4 Device of the encoder profile. If not active ( „disabled), the encoder operates as a Class 3 Device of the encoder profile. Here setting a preset is disabled. G1_XIST1 affected by preset If active (“Yes”), setting a preset will affect both the left-aligned position value G1_XIST1 and the right-aligned position value G1_XIST2. If not active (“No”), the left-aligned position value G1_XIST1 is not added an offset that is internally calculated upon setting a preset. In this case, both position values G1_XIST1 and G1_XIST2 may be different!
Scaling function control If active (“enabled”), resolution („steps per revolution“, “measuring units per revolution”) and the total measuring range can be parameterized at will within the admissible limits. If not active (“disabled”), the previous encoder settings for resolution and total measuring range will remain, i.e. the maximum limits. Any try to enter deviating parameters will result in a parameterization error signal.
Total measuring range (units) Parameterization of the required total measuring range, „TMR“. Singleturn encoders require here the same parameter as for the resolution (“Measuring units per revolution“). Admissible values range from 2 to the product of programmed resolution multiplied by maximum number of revolutions. The maximum limit of the parameterization software is only applicable if the resolution is also the maximum. All multiturn encoders and multivoPlus singleturn encoders need a 32 bit value here to get two input fields, „Total measuring range (units) hi“ and „lo“. How to split up the 32 bit value into two 16 bit values
