Qualified Personnel
The product/system described in this documentation may be operated only by personnel qualified for the specific |
|
| ask in accordance with the relevant documentation, in particular its warning notices and safety instructions. |
|
| Qualified personnel are those who, based on their training and experience, are capable of identifying risks and |
|
avoiding potential hazards when working with these products/systems.If more than one degree of danger is present, the warning notice representing the highest degree of danger will
be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to
property damage products may only be used for the applications described in the catalog and in the relevant technical
documentation. If products and components from other manufacturers are used, these must be recommended
or approved by . Proper transport, storage, installation, assembly, commissioning, operation and
maintenance are required to ensure that the products operate safely and without any problems. The permissible
ambient conditions must be complied with. The information in the relevant documentation must be observed.
Trademarks
All names identified by ® are registered trademarks of AG. The remaining trademarks in this publication
may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.
Disclaimer of Liability
We have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the
information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.This manual supplements the system manual of the automation system/ET 200MP
distributed I/O system as well as the function manuals. This manual contains a descrtion of
the module-specific information. The system-related functions are described in the system
manual. All system-spanning functions are described in the function manuals.
The information provided in this manual and the system manual enables you to commission
the CPU 1511T-1 PN.
Conventions
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software "STEP 7 (TIA Portal)".
Please also observe notes marked as follows:
Note
A note contains important information on the product described in the documentation, on the
handling of the product or on the section of the documentation to which particular attention
should be paid provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. ' products and solutions constitute one element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems,
machines and networks. Such systems, machines and components should only be
connected to an enterprise network or the if and to the extent such a connection is
necessary and only when appropriate security measures (e.g. firewalls and/or network
segmentation) are in place.
For additional information on industrial security measures that may be implemented, please' products and solutions undergo continuous development to make them more
secure. strongly recommends that product updates are applied as soon as they are
available and that the latest product versions are used. Use of product versions that are no
longer supported, and failure to apply the latest updates may increase customers' exposure
to cyber threats.
To stay informed about product updates, subscribe to the Industrial Security You can find current information on the following topics quickly and easily here:
● Product support
All the information and extensive know-how on your product, technical specifications,
FAQs, certificates, downloads, and manuals.
● Application examples
Tools and examples to solve your automation tasks – as well as function blocks,
performance information and videos.
● Services
Information about Industry Services, Field Services, Technical Support, spare parts and
training offers.
● Forums
For answers and solutions concerning automation technology.
● mySupport
Your personal working area in Industry Online Support for messages, support queries,
and configurable documents.
This information is provided by the Industry Online Support in the The Industry Mall is the catalog and order system of AG for automation and drive
solutions on the basis of Totally Integrated Automation (TIA) and
Totally Integrated Power (T).
Catalogs for all the products in automation and drives are available on the The System Manual and Getting Started describe in detail the configuration, installation,
wiring and commissioning of the SIMATIC and ET 200MP systems. The STEP 7
online help supports you in the configuration and programming.
Device information
Product manuals contain a compact descrtion of the module-specific information, such as
properties, wiring diagrams, characteristics and technical specifications.
