 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E94ASSE2924 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, MoneyGram, Western Union |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E94ASSE2924: | E94ASSE2924 |
|---|---|---|---|
| GERMANY: | GERMANY | Material: | Iron |
| Temperature: | 20-90 | Wire: | Wire |
| Dimension: | 80mm |
| New Capture value present1) 8 When the current counter or position value is saved as a Capture value, the technology function triggers a hardware interrupt in the |
|
| CPU. Synchronization of the counter by an external signal |
|
| v9 At the synchronization of the counter by an N signal or edge at DI, the technology function triggers a hardware interrupt in the CPU. |
Direction reversal2) 10 When the count value or position value changes direction, the
technology function triggers a hardware interrupt in the CPU.
1) Can only be set in counting mode
2) Feedback bit STS_DIR is preset to "0". When the first count value or position value change occurs in the reverse direction
directly after switching on the digital on-board I/O, a hardware interrupt is not triggeredor current measurement as 4-wire transducer Yes
For resistance measurement with two-wire connection
Yes
For resistance measurement with three-wire connection
Yes
For resistance measurement with four-wire connection
Yes
Connectable encoders
2-wire sensor Yes
• Permissible quiescent current (2-wire sensor),
max.
1.5 mA
Encoder signals, incremental encoder (asymmetric)
Input voltage 24 V
Input frequency, max. 100 kHz
Counting frequency, max. 400 kHz; with quadruple evaluation
Configurable signal filter Yes
Incremental encoder with A/B tracks, 90° phaseshiftednearity error (relative to input range), (+/-) 0.1%
Temperature error (in relation to input range), (+/-) 0.005%/K
Crosstalk between the inputs, max. -60 dB
Reproducibility in steady state condition at 25 °C
(relative to input range), (+/-)
0.05%
Output rple (relative to output range, bandwidth
0 to 50 kHz), (+/-)
0.02%
Linearity error (relative to output range), (+/-) 0.15%
Temperature error (in relation to output range),
(+/-)
0.005%/K
Crosstalk between outputs, max. -80 dB
Reproducibility in steady state condition at 25 °C
(relative to output range), (+/-)
0.05%
Operational limit across the entire temperature
range
Voltage, relative to input range, (+/-) 0.3%
Current, relative to input range, (+/-) 0.3%
Resistance, relative to input range, (+/-) 0.3%
Resistance-type thermometer, relative to input
range, (+/-)
Pt100 Standard: ±2 K, Pt100 Climatic: ±1 K,
Ni100 Standard: ±1.2 K, Ni100 Climatic: ±1 K
Voltage, relative to output range, (+/-) 0.3%
Current, relative to output range, (+/-) 0.3%
Basic error limit (operational limit at 25 °C)
Voltage, relative to input range, (+/-) 0.2%
Current, relative to input range, (+/-) 0.2%
Resistance, relative to input range, (+/-) 0.2%
Resistance-type thermometer, relative to input
range, (+/-)
Pt100 Standard: ±1 K, Pt100 Climatic: ±0.5 K,
Ni100 Standard: ±0.6 K, Ni100 Climatic: ±0.5 K
Voltage, relative to output range, (+/-) 0.2%
Current, relative to output range, (+/-) 0.2%
Interference voltage suppression for f = n x (f1 +/-
1%), f1 = interference frequency
Series-mode interference (peak of the interference
< rated value of the input range), min.
30 dB
Common mode voltage, max. 10 V
Common mode interference, min.MRP Yes; as MRP redundancy manager and/or MRP
client; max. number of devices in the ring: 50
• MRPD Yes; requirement: IRT
• Prioritized startup Yes; max. 32 PROFINET devices
• Number of connectable IO devices, max. 128; a maximum of 256 distributed I/O devices in
total can be connected by means of AS-i,
PROFIBUS or PROFINET
• of these, IO devices with IRT, max. 64
• Number of connectable IO devices for RT,
max.
128
• of these in a line, max. 128
• Number of IO devices that can be enabled/disabled
simultaneously, max.
