LENZE EMB9352-E EMB9352-E EMB9352-E EMB9352-E EMB9352-E EMB9352-E EMB9352-E

The CPU is available as a central interrupt server in up to three project languages. The HMI
takes over the display in the project languages specified for the CPU. If you require message
texts in additional languages, you can load these via the configured connection to your HMI.
The CPU, STEP 7 and your HMI guarantee data consistency without additional engineering
steps. The maintenance work is easier.The CPU 1511C-1 PN consists of a CPU part, an analog on-board I/O module (X10) and a
digital on-board I/O module (X11). When configured in the TIA Portal, the compact CPU
therefore occupies a single shared slot (slot 1).
The properties and functions of the CPU part and the analog and digital on-board I/O
modules can be found in the subsections below. The properties describe the hardware
features of the CPU part and the analog and digital on-board I/O modules. The functions
describe the functions of the firmware of the CPU part and the analog and digital on-board
I/O modules.
Article number
6ES7511-1CK01-0AB0
Accessories
The following accessories are included in the scope of delivery and can also be ordered
separately as spare parts:
● 2 x front connector (push-in terminals) including cable ties
● 2 x shield clamp
● 2 x shield terminal
● 2 x infeed element (push-in terminals)
● 2 x labeling str
● 2 x universal front cover
For more information on accessories, refer to the , ET 200MP system manual All CPUs of the SIMATIC product series feature
a display with plain text information. The display
provides information on order numbers, firmware version
and serial numbers of all connected modules. In
addition, you can set the address of the CPU and
carry out further network settings. The display shows
occurring error messages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC S7-
1500 Display Simulator are shown on the displayThe X1 interface has two ports (P1 R and P2 R). In
addition to basic PROFINET functionality, its also supports
PROFINET IO RT (real time) and IRT (isochronous
real time), which means you can configure
PROFINET IO communication or real-time settings on
the interface.
Port 1 and Port 2 can also be used as ring ports for the
configuration of redundant ring structures in Ethernet
(media redundancy).
Basic PROFINET functionality comprises:
• HMI communication
• Communication with the configuration system
• Communication with a higher-level network (backbone,
router, )
• Communication with another machine or automation
cellAs an IO controller the CPU addresses the connected
IO devices
• I-device:
As an I-device (intelligent IO device) the CPU is assigned
to a higher-level IO controller and is used in
the process as an intelligent pre-processing unit of
sub-processeshe system diagnostics and outputs these messages
via a programming device/PC, HMI device, the Web
server or the integrated display. System diagnostics
information is also available when the CPU is in STOP
mode.
Diagnostics function manual
(://support.automation..c
om/WW/view/en/59192926)
Integrated Web server The Web server lets you access the CPU data by
means of a network. Evaluations, diagnostics, and
modifications are thus possible over long distances.
Monitoring and evaluation is possibleTrace functionality supports you in troubleshooting
and/or optimizing the user program.
You record device tags and evaluate the recordings
with the trace and logic analyzer function. Tags are, for
example, drive parameters or system and user tags of
a CPU.
The device saves the recordings. You can read out and
permanently save the recordings with the configuration