 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | EVS9322-EK |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | Material: | Iron |
|---|---|---|---|
| Germany: | Germany | Temperature: | 20-90 |
| Dimension: | 80mm | Wire: | Wire |
| EVS9322-EK: | EVS9322-EK |
| products. The ADC used digitalizes the analog signal and approximates its value with a stepped curve. The |
|
| in the form of bit patterns. For this purpose, transducers which can be connected to the analog module |
|
| resolution specifies the number of increments of the analog value along this stepped curve here.Controllers are only capable of processing analog values |
measure physical variables such as pressure or temperature.
This analog value is measured by the analog
input module in the form of the measurement types
current, voltage or resistance. The analog on-board I/O
module supports the following measurement types on
the following channels.
• Voltage measurement type can be set individually
for channel 0 to 3
• Current measurement type can be set individually
for channel 0 to 3
• Resistor measurement type can be set for channel 4
• Thermal resistor measurement type can be set for
channel 4s The analog on-board I/O module can diagnose errors.
The module reports the diagnosed state to the CPU
using a diagnostics error interrupt. Different types of
diagnostics are available that you can parameterize
channel-granularly.
Chapter Parameters of the analog
on-board I/O (Page 118)
Hardware interrupt You can react to process events (such as negative/positive
exceeding of specific limits) through the
configuration of a hardware interrupt. Hardware interrupts
can be parameterized channel-granularly.
• Chapter Parameters of the analog
on-board I/O (Page 118)
• Chapter Structure of a data record
for input channels of the analog
on-board I/O (Page 162)
• STEP 7 online helpOnce the CPU has processed the digital signal, a DAC
(digital-to-analog converter) integrated in the analog onboard
I/O module converts the output signal to an analog
current or voltage value. The resulting value of the
output signal corresponds to the output value with
which the analog on-board I/O module controls the
analog actuatorsWith the selection of the type of output you specify
whether the digital-to-analog converter is to convert the
output signal into the type of output "Current" or "Voltage".
The output can be selected by individual channel.
Configurable diagnostics The analog on-board I/O module can diagnose errors.
The module reports the diagnosed state to the CPU
using a diagnostics error interrupt. Different types of
diagnostics are available that you can parameterize
channel-granularlyYou have the option of reassigning parameters for the
analog on-board I/O module in RUN (for example,
measuring ranges of individual channels can be modified
in RUN without affecting the other channels).
• Chapter Parameters of the analog
on-board I/O (Page 118)
• Chapter Parameter assignment
and structure of the parameter
data records of the analog onboard
I/O (Page 162)
Support of the value status
(Quality Information, QI)
Value status = 1 ("Good") indicates that the value of
the assigned input at the terminal is valid.
Value status = 0 ("Bad") indicates that the read value
is not valid.
Chapter Address space of the analog
on-board I/O (Page 111)You have the option of reassigning parameters for the
analog on-board I/O module in RUN (for example,
output ranges of individual channels can be modified
in RUN without affecting the other channels).
• Chapter Parameters of the analog
on-board I/O (Page 118)
• Chapter Parameter assignment
and structure of the parameter
data records of the analog onboard
