 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E94ASHE0244 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E94ASHE0244: | E94ASHE0244 |
|---|---|---|---|
| GERMANY: | GERMANY | Material: | Iron |
| Color: | Black | Temperature: | 20-90 |
| Wire: | Wire | Dimension: | 80mm |
| system diagnostics is activated by default for the CPUs. The different types of diagnostics are configured instead of programmed. |
The CPU is available as a central interrupt server in up to three project languages. The HMI takes over the display in the project languages specified for the CPU. If you require message |
| System diagnostics information is shown uniformly and in plain text on the display of the CPU, in STEP 7, on the HMI and on the Web server, even for alarms related to drives. |
texts in additional languages, you can load these via the configured connection to your HMI. The CPU, STEP 7 and your HMI guarantee data consistency without additional engineering steps. The maintenance work is easier.All CPUs of the SIMATIC product series feature |
| his information is available in RUN mode, but also in STOP mode of the CPU. The diagnostic information is updated automatically when you configure new hardware components. |
a display with plain text information. The display provides information on order numbers, firmware version and serial numbers of all connected modules. In |
addition, you can set the address of the CPU and
carry out further network settings. The display shows
occurring error messages directly in plain text.
In addition to the functions listed here, a multitude of
other functions that are described in the SIMATIC S7-
1500 Display Simulator are shown on the display.
• , ET 200MP system
manual
(://support.automation.sieme
ns.com/WW/view/en/59191792)
• SIMATIC Display Simulator
(://.automation..
com/salesmaterial-as/interactivemanuals/getting-started_simatic/disp_tool/start_en.html)
Supply voltage The 24 V DC supply voltage is supplied via a 4-pole
connection plug that is located at the front of the CPUAs an IO controller the CPU addresses the connected
IO devices
• I-device:
As an I-device (intelligent IO device) the CPU is assigned
to a higher-level IO controller and is used in
the process as anThe system automatically generates the messages for
the system diagnostics and outputs these messages
via a programming device/PC, HMI device, the Web
server or the integrated display. System diagnostics
information is also available when the CPU is in STOP
mode.The Web server lets you access the CPU data by
means of a network. Evaluations, diagnostics, and
modifications are thus possible over long distances.
Monitoring and evaluation is possible without STEP 7;
all you need is a Web browser. Make sure that you take
appropriate measures (e.g. limiting network access,
using firewalls) to protect the CPU from being compromisedTrace functionality supports you in troubleshooting
and/or optimizing the user program.
You record device tags and evaluate the recordings
with the trace and logic analyzer function. Tags are, for
example, drive parameters or system and user tags of
a CPU.
The device saves the recordings. You can read out and
permanently save the recordings with the configuration
system (ES), if required. The trace and logic analyzer
function is therefore suitable for monitoring highly dynamic
processes.
The trace record can also be displayed through the
Web server.With OPC UA, you can exchange data via an open and
manufacturer-neutral communication protocol. The
CPU can act as OPC UA DA server. The CPU as
OPC UA server can communicate with OPC UA clients.
The OPC UA Companion Specification allows methods
to be specified uniformly and independently of the
manufacturer. Using these specified methods, you can
easily integrate devices from various manufacturers
into your plants and production processes.You can use configuration control to operate different
real hardware configurations with a configured maximum
configuration of the automation system/ET
200MP distributed I/O system. This means that,
in series machine manufacturing in particular, you have
the option of operating/configuring different configuration
variants of a machine with a single project.RT prioritizes PROFINET IO telegrams over standard
telegrams. This ensures the required determinism in
the automation technology. In this process the data is
transferred via prioritized Ethernet telegrams.
PROFINET function manual
(s://support.industry..co
m/cs/ww/en/view/49948856)
