 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E82EV453k4B |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E82EV453k4B: | E82EV453k4B |
|---|---|---|---|
| Material: | Iron | Germany: | Germany |
| Color: | Black | Temperature: | 20-90 |
| Dimension: | 80mm | Wire: | Wire |
| You can read the status (e.g. "On" or "Off") of LEDs of a CPU or a module using the "LED" instruction. Note, however, that is | You can find additional information on the "LED" instruction in the STEP 7 online help. Technical specifications of the CPUs |
| Status and error displays of the CPUs All R/H CPU Equipment Manuals, 10/2018 Edition, Section 4.1 Status and error displays of the CPU |
ll R/H CPU Equipment Manuals, 10/2018 Edition, Section 5 Technical specifications The technical specifications for the CPU Equipment Manuals have been supplemented by the |
| not possible to read the LED status of the LINK RX/TX LEDs on R/H CPUs. | ollowing technical data:The accuracy of cyclic interrupts for standard CPUs and R/H CPUs is stated in the above-mentioned function |
manual.
The accuracy data for the cyclic interrupt also apply to all other higher priority execution levels/OBsThis product information supplements the documentation for /ET 200MP and takes precedence over our system
manuals, function manuals and manuals.
The section "Notes on Motion Control" applies for the following function manuals as of edition 12/2017:
● Motion Control V4.0 in TIA Portal V15
● T Motion Control V4.0 in TIA Portal V15
● T Kinematics Functions V4.0 in TIA Portal V15
Security information
provides products and solutions with industrial security functions that support the secure operation of plants,
systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is necessary to implement – and
continuously maintain – a holistic, state-of-the-art industrial security concept. ' products and solutions constitute one
element of such a concept.
Customers are responsible for preventing unauthorized access to their plants, systems, machines and networks. Such
systems, machines and components should only be connected to an enterprise network or the if and to the extent
such a connection is necessary and only when appropriate security measures (e.g. firewalls and/or network segmentation)
are in place.
For additional information on industrial security measures that may be implemented, please visit' products and solutions undergo continuous development to make them more secure. strongly
recommends that product updates are applied as soon as they are available and that the latest product versions are used.
Use of product versions that are no longer supported, and failure to apply the latest updates may increase customers'
exposure to cyber threats.
To stay informed about product updates, subscribe to the Industrial Security RSS Feed under You can only create an Asset Management data record for an CPU as I-device for CPUs as of firmware version
2.5.2.
- Access protection for F-CPUs and blocking online access to a password-protected CPU
Access protection for F-CPUs
If you want to achieve the same access protection for an F-CPU as for a standard CPU "No access (complete protection)",
you need to have assigned the two passwords above in STEP 7 in the "Protection & Security" area of the F-CPU properties:
● Full access incl. fail-safe (no protection)
and
● Full access (no protection)You can block online access to a password-protected CPU. The effect of the access block is independent of password
protection. This means that if you access a CPU via a PG/PC and enter the correct password, you are still denied access to
the CPU.
You have two options for blocking online access:
● Via the display on the CPU (Settings > Protection > Level of protection)
● In STEP 7 using the instruction ENDIS_PW: Limit and enable password legitimation
Special note for standard and F-CPUs
If you want to block individual access levels for a standard or F-CPU (e.g. read access, HMI access, no access (complete
protection)) via the display or the ENDIS_PW instruction, you need to have assigned
