 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E82EV551K2C |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E82EV551K2C: | E82EV551K2C |
|---|---|---|---|
| GERMANY: | GERMANY | Material: | Iron |
| Color: | Black | Temperature: | 20-90 |
| Dimension: | 80mm | Wire: | Wire |
| of the motion is not interrupted for subsequent motion jobs. The kinematics is not in "Interrupted" state (StatusWord.X17 (Interrupted)). |
With the "Forward" button, you move the kinematics or an axis by jogging to the position specified under "Target position". |
| By entering the value "0.0" for the velocity override, you can suspend the motion until all requested jobs have been entered | The motion direction of the Cartesian orientation is not limited to the positive direction here. The orientation axis is moved with the "Shortest distance" mode. |
| n the job chain. Then you can continue the motion with a velocity override "100.0". "Jog to target position" operating mode of the Kinematics control panel (T) |
Jogging or positioning the orientation axis A with the Kinematics control panel (S71500T) Contrary to the behavior described in the documentation, you can only position orientation axis A in the world coordinate |
system (WCS) with the operating mode "Jog to target position" on the Kinematics control panel.
Moving a rotary kinematics axis using the Kinematics control panel (T)
Contrary to the behavior described in the documentation, you cannot move a rotary kinematics axis in the machine
coordinate system (MCS) using the Kinematics control panel with the operating mode "Jog" if the "Modulo" setting is
activated for this axis. Moving the axis with the Axis control panelStarting point, intermediate point or end point are identical
when "CircMode" = 0.
Specify different values for starting point, intermediate
point and end point.
Intermediate point cannot be reached when "CircMode" = 0. Adjust the intermediate point.
Starting point and end point are identical when "CircMode" = 2
as well as "PathChoice" = 2 or 3 is specified.
Define different start and end points.
Dynamic adaptation could not be performed. Switch off the dynamic adaptation.
Technology interrupt 809 (T)
The list of technology interrupts is being expanded by technology interrupt 809.
No. Reaction Error bit Warning
bit
Restart Diagnostic
buffer
Alarm text
809 Stop with maximum
dynamic values of the
axes
X2 - - - Path dynamic limit through dynamic of the orientation
motion faulty.
The technology interrupt 809 is displayed with the following alarm text:
Alarm text Remedy
Path dynamic limit through dynamic of the orientation motion
faulty.
Velocity is limited to zero. Configure a higher maximum velocity for the axes involved
in the orientation motion.
Acceleration/deceleration is limited to zero. Configure a higher maximum acceleration or deceleration
for the axes involved in the orientation motion.
Error ID "16#800D" (T)
ErrorID Description Remedy
16#800D The job is not permitted in the current state.
"Restart" is active.
While a restart is being performed, the technology object
cannot perform any jobs.
