 |
| Place of Origin: | GERMANY |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E84AV-BDE2224SX0 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E84AV-BDE2224SX0: | E84AV-BDE2224SX0 |
|---|---|---|---|
| Germany: | Germany | Temperature: | 20-90 |
| Wire: | Wire | Material: | Iron |
| Color: | Black | Dimension: | 80mm |
| an low speed → Contactor K5 actuated | The lamps are dimmed via the Phase angle control - Phase angle proportional function of the digital output mode: |
| Fan high speed → Contactors K3 and K4 actuatedThe following figure shows the wiring of the light control on the DQ 4x24..230VAC/2A HF | L1 → Entry light ● L2 → Interior ligCreate a new project and add the CPU 1517H-3 PN and the 3 ET 200SP distributed I/O |
| digital output module ⑥ | L1 → Entry light ● L2 → Interior ligCreate a new project and add the CPU 1517H-3 PN and the 3 ET 200SP distributed I/O |
ystems. Network the assembly to a PROFINET ring.
Add 2 HMI devices TP1900 Comfort to the assembly.
You do not configure the PM 190 W 120/230 V AC load current supplies.
Requirement
You have set the address of the PG/PC, 192.168.0.50 in the example.
Creating a project and assigning hardware
1. Create a new project in STEP 7. Give the project the name "H_GS"Select "Configure a device" and then "Configure networks".
The network view opens.
3. Select CPU 1517H-3 PN from the hardware catalog in the network view.Drag and drop the CPU to the task window in the network view.
Results:
– STEP 7 automatically creates both 1517H-3 PN CPUs for the redundant system.
– STEP 7 automatically assigns the MRP role "Manager (auto)" to the PROFINET
interfaces X1 of both CPUs.
– STEP 7 displays both CPUs in the network view graphically.5. Select an ET 200SP interface module IM 155-6 PN HF (article number 6ES7155-6AU01-
0CN0) from the hardware catalog.
6. Drag and drop the interface module to the task window in the network view.
7. Drag and drop 2 further IM 155-6 PN HF interface modules to the task window in the
network view.
8. Select a SIMATIC Comfort Panel TP1900 Comfort from the hardware catalog as an HMI
device.
Recommendation: Configure the HMI devices with the HMI Device Wizard (Page 30).
9. Drag and drop the TP1900 Comfort to the task window in the network view.
10.Drag and drop a further TP1900 Comfort to the task window in the network view.
Results: The project has been created. The hardware components have been inserted.
addresses for the PROFINET interfaces of the devices have been automatically assigned.To assign the ET 200SP distributed I/O systems to H on a system-redundant basis,
connect every IM 155-6 PN HF interface module to every CPU.
o do so, proceed as follows:
1. Drag-and-drop a line between the PROFINET interface of IM 155-6 PN HF and
PROFINET interface X1 of the left-hand CPU.
2. Drag-and-drop a line between the PROFINET interface of IM 155-6 PN HF and
PROFINET interface X1 of the right-hand CPU.
3. Assign the two other IM 155-6 PN HF devices to the two CPUs in exactly the same way.
Result: The distributed I/O system ET 200SP are connected to H on a systemredundant
basis.You create two redundancy connections between the H-CPUs via fiber-optic cables using a
total of four synchronization modules (two in each H-CPU). You replace the synchronization
modules (for cables up to 10 km in length) in STEP 7.
STEP 7 automatically assigns an address to each PROFINET interface of a CPU. You
can also assign the addresses manually. For PROFINET interface X1 of the CPUs, the
addresses must be located in the same subnet. In the example you accept the preset
addresses.
