LENZE E82EV113K4C E82EV113K4C E82EV113K4C E82EV113K4C E82EV113K4C E82EV113K4C

SIMATIC T Motion Control" SIMATIC T Motion Control V3.0 in
the TIA Portal V14 (PID compact controllers are integrated as standard in all CPUs. In your plant, the
PID controller adjusts a physical setpoint and stabilizes it against interferences at the same
time. Depending on your plant, you can use different PID controllers. All controllers support
the following functions:
● Manageable configuration screens
● Automatic determination of the controller parameters
● Commissioning screens with integrated trace
PID controller versions
PID controllers Descrtion
PID Compact Continuous PID controller
PID 3step Step controller for integrating actuators
PID Temp Temperature controller for heating and cooling with two separate actuators
Development of a temperature control system for drying panes of glass in the production of
mirrors
Feature:
The drying process is a critical phase in silvering mirrors. It is decisive for optimum product
quality. During the silvering process, the glass panes are treated with chemical solutions and
then dried in a pre-heated oven. Temperature control plays a key role in the drying process.
Solution:
A PID controller controls the temperature in the drying oven. The filament of each infrared
lamp in the oven is controlled separately remotely, up to now this could only be controlled
manually.
Benefits
The integrated controller PID Control of the SIMATIC CPUs offer you the following
advantages:
● high-quality end product due to optimum control performance
● high flexibility in the drying oven (see example)
● time saving thanks to automatic control parameter optimization for optimum control
performance and simple commissioningTechnology functions are integrated into the SIMATIC compact CPUs.
Function Value Descrtion
Six high-speed counters up to 100 kHz For pulse and incremental encoders
Frequency measurement 0.04 Hz - 400 kHz
Period duration measurement 2.5 μs - 25 s
Velocity measurement Dependent on measurement interval and signal evaluation
Unit can be defined by user
Pulse width modulation (PWM
output)
max. 4 (up to 100
kHz)
Output of a signal with defined period duration and variable
on-load factor at DQ

Pulse Train Output (PTO output) max. 4 (up to 100
kHz)
Output of position information, e. g. for activation of stepper
motor drives or simulation of an incremental encoder
Frequency output up to 100 kHz Precise assignment of a frequency value with high frequencies
Benefits
Compared with the other SIMATIC CPUs, the compact CPUs offer added value in a
small space:
● They combine CPU with front display and inputs/outputs in one enclosure
● compact size with high performance
● important technology functions such as counting, measuring and positioning are
integrated
● cost effective compared to modular systems with CPU and modules
● space saving design
● can be expanded by SIMATTechnology modules for counting, measuring and position detection offer you the following
advantages:
● fast and timely detection of events with fine resolution for high productivity and product
quality
● hardware-level signal processing for rapid counting, measurement and position detection
for a variety of transducers
● simple setup and commissioning of the technology functions in the TIA Portal
● can be used centrally in SIMATIC and in ET 200MP distributed I/O system
● quick response thanks to different hardware interrupts