 |
| Place of Origin: | Germany |
| Brand Name: | LENZE |
| Certification: | CE |
| Model Number: | E82EV152k2B |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| LENZE: | LENZE | E82EV152k2B: | E82EV152k2B |
|---|---|---|---|
| Germany: | Germany | Color: | Black |
| Material: | Iron | Temperature: | 20-90 |
| Dimension: | 70mm | Wire: | Wire |
| Open the "Properties" tab of the CPU/interface module in STEP 7 and select the "System power supply" in the navigation. |
The PS 60W 24/48/60VDC HF supplies enough energy in case of a POWER OFF that the CPU can save the entire data area retentively. Requirements |
| Select the option "No connection to supply voltage L+".When you use the PS 60W 24/48/60VDC HF system power supply, t | STEP 7 V14 SP1 or higher ● PS 60W 24/48/60VDC HF system power supply ● CPU with firmware version as of V2.1.0, see table below Applicable CPUs |
| , the entire data area can be used as retentive memory for CPUs as of firmware version V2.1.0 and higher. |
The size of the retentive memory depends on the size of the work memory for data of the CPU used. The table below shows the applicable CPUs with the required hardware function |
versions.f you are using the PS 60W 24/48/60VDC HF, the 24 V supply of the CPU is not taken
into account in the power budget calculation. We therefore recommend that you do not
connect the 24 V DC to the CPU.
You must set the "System power supply" parameter to the option "No connection to
supply voltage L+" during configuration of the CPU. STEP 7 checks the setting when
compiling the configuration.1516T(F)-3 PN/DP
2 - 31 8
When using a CPU 1517(F)-3 PN/DP,
CPU 1517T(F)-3 PN/DP
2 - 31 8
When using a CPU 1518(F)-4 PN/DP, CPU
1518(F)-4 PN/DP MFP
2 - 31 8
Technology modules 2 - 31 30
CPU 1513R-1 PN has a PROFINET IO interface with two ports (X1 P1 R and X1 P2 R).
To connect an HMI device to the CPUs over Industrial Ethernet, you set up the PROFINET
ring over PROFINET interface X1. Integrate a switch into the PROFINET ring. Use this to
establish an Industrial Ethernet connection.
You can find additional information on the interfaces of CPU 1513R-1 PN in the relevant
device manual.The figure below shows an example of how to connect an HMI device with CPU 1515R-2 PN
within the PROFINET ring.
CPU 1515R-2 PN has a PROFINET IO interface with two ports (X1 P1 R and X1 P2 R) and
one PROFINET interface (X2 P1).
Integrate a switch into the PROFINET ring to connect an HMI device to the PROFINET ring.
Use this to establish a connection to the HMI device.
The PROFINET ring is set up using the PROFINET IO interfaces (X1) of the CPUs. If you
operate HMI devices within the ring, you need to assign the MRP role "Client" to the MRP
domain. You can find more information on HMI device application planning in the section
Requirements (Page 49).
You can find more information on the interfaces of CPU 1515R-2 PN in the relevant device
manual.More information on how to set up an HMI connection to the R/H redundant system
is available in the Communication All modules of the R/H redundant system are unenclosed equipment. You may only
install unenclosed equipment in housings, cabinets or electrical operating rooms. The
housings, cabinets and electrical operating rooms must guarantee protection against electric
shock and spread of fire. The requirements for mechanical strength must also be met. The
housings, cabinets, and electrical operating rooms must not be accessible without a key or
tool. Personnel with access must have been trained or authorized.
Installation position
The R/H redundant system is designed for use in the following mounting positions:
● Horizontal mounting position up to 60° C
● Vertical mounting position up to 40° C
