LENZE E82EV223k4B E82EV223k4B E82EV223k4B E82EV223k4B E82EV223k4B E82EV223k4B

Please contact with “Tommy” for the price

DPCJC204

DPCJC208

DPCJC212

DPCJC216

DPCJC220

DPCJC224

DPCJC228

DPCJC232

DPCJC236

DPCJC240

DPCJG304

DPCJG308

DPCJG312

DPCJG316

DPCJG320

DPCJG324

DPCJG328

DPCJG332

DPCJG336

DPCJG340

DPCJG344

DPCJG352

DPCJG356

DPCJG360

DPCJG364

DPCJG368

DPCJG372

DPCJG376

DPCJV404

DPCJV408

DPCJV412

HPC600002CG 

HPC600010CG 

HPC600002AG 

HPC600010AG

HPC500

HPC502

AMC910

ASC301

CSC100

CSC200

macaI

MTC-140A

MTC-320A

MTC-650A

T-975

T-970

T-960

T-965

71785SE

74422SE 

71862SE

95384WE

75048SE

70597SE

71072SE

71063SE

The startup type "Warm restart - Operating mode before POWER OFF"
is set and the CPU was in STARTUP, RUN, RUN-Syncup or RUNRedundant
before POWER OFF.
POWER ON → SYNCUP
The CPUs implement pairing after switch-on. The backup CPU then switches
to the SYNCUP operating state if:
• The mode selector is in the RUN position
and
• The primary CPU is in the STARTUP or RUN operating statePOWER ON → STOP
The redundant system switches to the STOP system state after switch-on if:
• The mode selector is in the STOP position
or
• The hardware configuration and program blocks are inconsistent
or
• The startup type "No restart (remain in STOP)" is set
or
• The startup type "Warm restart - Operating mode before POWER OFF" is
set and the redundant system was in STOP before POWER OFF.
The primary CPU
clears the nonretentive
memory and
resets the contents of
non-retentive data
blocks to the initial
values of the load
memory. Retentive
memory and retentive

DB contents are retainedSTOP → STARTUP
The redundant system switches to the STARTUP system state if:
• You set a CPU to RUN via the PG/PC or the display and the mode selector
is set to RUN
or
• You set the mode switch from STOP to RUN.
The CPU that you switch from STOP to RUN first remains/becomes the primary
CPU. It switches to the STARTUP operating state and processes
startup OB 100.
The backup CPU remains in STOP.
The primary CPU
clears the nonretentive
memory and
resets the contents of
non-retentive data
blocks to the initial
values of the load
memory. Retentive
memory and retentive
DB contents are retained.
Operating state
transition
STOP → STARTUP
After switch-on, the primary CPU switches to the STARTUP operating state
if:
• The hardware configuration and program blocks are consistent
and
• You set the CPU to RUN via the PG/PC or the display and the mode
selector is set to RUN
or
• You set the mode switch from STOP to RUN.The redundant system switches from STARTUP to the RUN-Solo system
state if:
• The primary CPU has initialized the PLC tags
and
• the primary CPU has executed the startup blocks successfully