Accuracy of pulse duration Up to ±100 ppm ±2 μs at high-speed output; see
manual for details |
|
minimum pulse duration 2 µs; With High Speed output
Digital output functions, parameterizable |
|
Switching tripped by comparison values Yes; As output signal of a high-speed counter
• PWM output Yes |
|
Number, max. 4
– Cycle duration, parameterizable Yes
– ON period, min. 0 %
– ON period, max. 100 %
– Resolution of the duty cycle 0.0036 %; For S7 analog format, min. 40 ns
• Frequency output Yes
• Pulse train Yes; also for pulse/direction interface0.5 A; 0.1 A with high-speed output, i.e. when
using a high-speed output; see manual for details
• on lamp load, max. 5 W; 1 W with high-speed output, i.e. when using
a high-speed output; see manual for details
Load resistance range
• lower limit 48 Ω; 240 ohms with high-speed output, i.e. when
using a high-speed output; see manual for details
• upper limit 12 kΩ
Output voltage
• Type of output voltage DC
• for signal "0", max. 1 V; With high-speed output, i.e. when using a
high-speed output; see manual for details
• for signal "1", min. 23.2 V; L+ (-0.8 V)
Output current
• for signal "1" rated value 0.5 A; 0.1 A with high-speed output, i.e. when
using a high-speed output, observe derating; see
manual for details
• for signal "1" permissible range, min. 2 mA
• for signal "1" permissible range, max. 0.6 A; 0.12 A with high-speed output, i.e. when
using a high-speed output, observe derating; see
manual for details
• for signal "0" residual current, max. 0.5 mA
Output delay with resistive load
• "0" to "1", max. 200 µs
• "1" to "0", max. 500 µs; Load-dependent
for technological functions
– "0" to "1", max. 5 µs; Depending on the output used, see additional
description in manual
– "1" to "0", max. 5 µs; Depending on the output used, see additional
description in manual
Parallel switching of two outputs
• for logic links Yes; For technological functions: No
• for uprating No
• for redundant control of a load Yes; For technological functions: No
Switching frequency
• with resistive load, max. 100 kHz; For high-speed output, 100 Hz for
standard output
• with inductive load, max. 0.5 Hz; Acc. to IEC 60947-5-1, DC-13; observe
derating curve
• on lamp load, max. 10 HzCurrent per channel, max. 0.5 A; see additional description in the manual
• Current per group, max. 8 A; see additional description in the manual
• Current per power supply, max. 4 A; 2 power supplies for each group, current per
power supply max. 4 A, see additional description
in manual
for technological functions
– Current per channel, max. 0.5 A; see additional description in the manual
Cable length
