 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5850N64 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5850N64: | TS5850N64 |
|---|---|---|---|
| COLOR: | BLACK | Material: | Iron |
| Temperature: | 20-80 | Japan: | Japan |
| Wire: | Wire | Dimension: | 50mm |
TS3103N156
TS5850N64
TS4503N1828E100
TS3103N302
OAH14BSD
TS3667N1E2
TS5013N63
TS3641N32
TS5213N550
TS5210N530
TS4503N2000E100
TS3103N40
OAS66
TS3667N11E2
TS5016N61
TS3641N38
TS5213N551
TS5210N54
TS4503N2070E100
TS3132N32
OAS66
TS1857N16EP
TS3667N2E5
TS5016N63
| This manual contains notices you have to observe in order to ensure your personal safety | |
| as well as to prevent damage to property. |
|
| The notices referring to your personal safety are highlighted in the manual by |
a safety alert symbol, notices referring to property damage only have no safety alert symbol. The notices
shown below are graded according to the degree of danger.If more than one degree of danger is present, the warning notice representing the highest degree of
danger will be used. A notice warning of injury to persons with a safety alert symbol may also include a
warning relating to property damage.ersonnel
The device/system may only be set up and used in conjunction with this documentation. Commissioning
and operation of a device/system may only be performed by qualified personnel. Within the context of the
safety notices in this documentation qualified persons are defined as persons who are authorized to
commission, ground and label devices, systems and circuits in accordance with established safety
practices and standards.This device and its components may only be used for the applications described in the catalog or the
technical description, and only in connection with devices or components from other manufacturers which
have been approved or recommended by .
Correct, reliable operation of the product requires proper transport, storage, positioning and assembly as
well as careful operation and maintenance.All names identified by ® are registered trademarks of the AG.
The remaining trademarks in this publication may be trademarks whose use by third parties for their own
purposes could violate the rights of the owner.ability
e have reviewed the contents of this publication to ensure consistency with the hardware and software
described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However,
the information in this publication is reviewed regularly and any necessary corrections are included in subsequent
editions.The manual contains reference information on operator actions, descriptions of
functions and technical specifications of the central processing units, power supply
modules and interface modules of the .
How to configure, assemble and wire these modules (and other) in an
system is described in the installation manuals for each system.You will need general knowledge of automation to understand this manual.
Prerequisite is also sufficient knowledge in the use of computers or PC-type
equipment (programming devices, for example) with Windows 2000 or XP
operating system. The system is configured in STEP 7 standard software.
You should therefore have sufficient knowledge of this standard software. This
knowledge is provided in the “Programming with STEP 7” manual.
Please note the information on the safety of electronic control systems in the
appendix of this manual, in particular when operating an in safety-relevant
areas.The manual applies to the automation system.You can find details on approvals and standards in the “Module Data” reference
