 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5667N420 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | Temperature: | 20-90 |
| Dimension: | 80mm | Japan: | Japan |
| Wire: | Wire | TS5667N420: | TS5667N420 |
TS5667N420
| data record (Page 208)In case of error, the WRREC instruction returns the following error messages via the |
|
| STATUS block parameter:Invalid length; the length information in data record 196 is not correct. |
|
| 80B5H Configuration control parameters not assigned. 80E2H Data record was transferred in the wrong OB context. The data record must be transferred in the startup program. |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3630N1306
TS5013N69
TS2650N101E78
TS4126N1017E235
TS1981N56E19
TS3653N13E9
TS5N2E18
TS3630N1E1
TS5013N61
TS2651N111E78
TS4127N1017E215
TS1982N126E6
TS3653N44E8
TS3630N1E2
TS5013N89
TS2651N181E78
TS4127N1017E235
TS1982N128E6
8001231S
TS3653N4E12
TS5013N64
TS3630N2E3
TS5016N
TS5000N532
TS4231N6E17
TS1982N53E6
800123-2R
TS3653N14E12
TS5420N60
TS3630N2E4
TS5016N60
TS5000N632
TS4231N6E17
TS1982N56E18
TS3653N58E5
TS5778N155
80B8H Parameter error
Reasons for a parameter error are:
• Incorrect block ID in the header (not equal to 196)
• Invalid version identifier in the header
• A reserved bit was set
• A station master slot was assigned an invalid slot in the station
option
• Multiple slots in the station master are assigned to the same
slot in the station option
• For shared device on submodule level: violation of defined
restrictionsIf you have enabled configuration control, the CPU is not ready for operation without a
control data record. The CPU returns from startup to STOP if a valid control data record is
not transferred in the startup OB (for example, OB 100). The central I/O is not initialized
in this case. The cause for STOP mode is entered in the diagnostics buffer.
Note
If an incorrect control data record is transferred to the CPU in the startup OB, the startup
of the CPU may be prevented.
In this case, perform a reset to factory settings of the CPU and then transfer a correct
control data record.
● The CPU processes the WRREC instruction for transferring the control data record
asynchronously. For this reason, you must call WRREC in the startup OB (for example,
OB 100) repeatedly in a loop until the output parameters "BUSY" and "DONE" indicate
that the data record has been transferred.
– Tip: To program the loop, use the SCL programming language with the REPEAT ...
UNTIL instruction.Selection of the station option in the user program: In order for the CPU to know
which station option you want to operate, you must set up a possibility to select
between the various control data records in the user program. You can implement the
selection, for example, via an Int tag that references an array element. Please note
that the variable used to select the control data record must be stored in the retentive
memory area. If the tag is not retentive, it will be initialized during startup of the CPU
and will thus be unavailable for selection of the station option.
– In the graphical programming languages, you implement the loop using
