 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5214N566 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5214N566: | TS5214N566 |
|---|---|---|---|
| Color: | Black | Japan: | Japan |
| Material: | Iron | Temperature: | 20-90 |
| Dimension: | 80mm | Wire: | Wire |
TS5214N566
| instructions for program control.Example in FBD: Use the LABEL (jump label) and JMP (jump at RLO=1) instruction |
record 196 during restart. – If you write a control data record with modified configuration, this will result in a station |
| to program a loop.If you have enabled configuration control, the ET 200MP station is not ready for operation | failure in the distributed I/O system. The original data record 196 is deleted and the new data record 196 is saved retentively. The station will then restart with the modified |
| ithout a control data record. As long as no valid control data record has been transferred, the I/O modules are considered as failed by the CPU and exhibit substitute value behavior. The interface module continues to exchange data. |
The control data record is stored retentively in the interface module. Note: – If the configuration is unchanged, |
Guang Zhou Lai Jie Electric Co.,LTDThe control data record is stored retentively in the interface module. Note:
– If the configuration is unchanged,
Please contact with “Tommy” for the price
TS5850N64
TS3630N1309E5
TS5010N
TS2650N11E78
TS3762N15E4
TS1981N56E19
TS3653N3E9
TS5850N70
TS3630N1306
TS5013N69
TS2650N101E78
TS4126N1017E235
TS1981N56E19
TS3653N13E9
TS5N2E18
TS3630N1E1
TS5013N61
TS2651N111E78
TS4127N1017E215
TS1982N126E6
TS3653N44E8
TS3630N1E2
TS5013N89
TS2651N181E78
TS4127N1017E235
TS1982N128E6
8001231S
TS3653N4E12
TS5013N64
configuration.For the online display and for the display in the diagnostics buffer (module OK or module
faulty), the station master is always used and not the differing station option.
Example: A module outputs diagnostics data. This module is configured in slot 4 in the
station master, but is inserted in slot 3 in the station option (missing module; see example in
the next section). The online view (station master) shows an incorrect module in slot 4. In the
real configuration, the module in slot 3 indicates an error via an LED display.If modules are entered as not present in the control data record, the automation system
behaves as follows:
● Modules designated as not present in the control data record do not supply diagnostics
and their status is always OK. The value status is OK.
● Direct writing access to the outputs that are not present or writing access to the process
image of outputs that are not present: Remains without effect; no access error is
signaled.
● Direct reading access to the inputs that are not present or reading access to the process
image of inputs that are not present: Value "0" is supplied; no access error is signaled.
● Write data record to module that is not present: Remains without effect; no error is
signaled.
● Read data record from module that is not present: The output parameter STATUS of the
instruction RDREC supplies the value 80A3H "General CM error".This section includes information on the following topics:
● Check before powering on for the first time
● Removing/inserting the SIMATIC memory card
● First power-on of the CPU
● First power-on of the ET 200MP on PROFINET IO
● First power-on of the ET 200MP on PROFIBUS DP
● Operating modes of the CPU
● CPU memory reset
● Identification and maintenance dataor commissioning
The following free software tools support you in commissioning:
● SIEMENS PRONETA in commissioning PROFINET systems.
● SIMATIC automation tool in commissioning the Automation System / Distributed
I/O System ET 200MP.
You can find more information on SIEMENS PRONETA and the SIMATIC Automation Tool
in the section Software (Page 87).The following questions provide guidance for the review of your automation
system/ET 200MP distributed I/O system in the form of a checklist.
Racks
● Are the mounting rails firmly installed on the wall, in the framework, or in the cabinet?
● Are the cable ducts correctly installed?
● Have the minimum clearances been observed?
Grounding and chassis concept
● Is the mounting rail connected to the protective conductoinstruction RDREC supplies the value 80A3H "General CM error".This section includes information on the following topics:
● Check before powering on for the first time
● Removing/inserting the SIMATIC memory card
● First power-on of the CPU
● First power-on of the ET 200MP on PROFINET IO
● First power-on of the ET 200MP on PROFIBUS DP
● Operating modes of the CPU
● CPU memory reset
● Identification and maintenance dataor commissioning
The following free software tools support you in commissioning:
● SIEMENS PRONETA in commissioning PROFINET systems.
● SIMATIC automation tool in commissioning the Automation System / Distributed
I/O System ET 200MP.
You can find more information on SIEMENS PRONETA and the SIMATIC Automation Tool
in the section Software (Page 87).The following questions provide guidance for the review of your automation
system/ET 200MP distributed I/O system in the form of a checklist.
Racks
● Are the mounting rails firmly installed on the wall, in the framework, or in the cabinet?
● Are the cable ducts correctly installed?
● Have the minimum clearances been observed?
Grounding and chassis concept
● Is the mounting rail connected to the protective conducto
