 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5205N45 |
| Minimum Order Quantity: | 1PCS |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | Temperature: | 20-90 |
| Japan: | Japan | Dimension: | 70mm |
| Wire: | Wire | TS5205N45: | TS5205N45 |
TS5205N454
| The integrated PROFINET interface of the CPU is configured using STEP 7 (IP address and device name configured) |
If applicable, delete all previously stored data before using the SIMATIC memory card. |
| The CPU is connected to the subnet. | Additional information about deleting the contents of the SIMATIC memory card can be found in the section SIMATIC |
| See the PROFINET Function Manual The CPU only supports pre-formatted SIMATIC memory cards. |
emory card - overview (Page 259). In order to work with the SIMATIC memory card, first ensure that the SIMATIC memory card |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3630N101E2
TS5017N56
TS5005N122
TS4244N3E24
TS1983N146E5
TS3653N81E27
TS2025N471E69
TS3630N102E4
TS5017N60
TS5007N122
TS4502N1000E200
TS1983N146E5
TS3653N78E5
TS2014N181E32
TS3630N22E3
TS5108-N153-5V
TS5007N635
TS4502N1202E200
TS252N30E1
AU6270N103E63
TS3653N94E5
TS5208N141E78
TS3630N22E4
TS5146N10
TS5208N500
TS4502N2000E100
TS3503N11E43
TS3653N181E8
TS3684N1E3
TS3631N1E1
is not write-protected. For this purpose, slide the slider on the SIMATIC memory card out of
the lock position.
If the inserted SIMATIC memory card is write-protected, the CPU display outputs the
symbol in the "Memory card" menu under "Overview" and writes a corresponding alarm to
the lower level of the menu.To insert a SIMATIC memory card, follow these steps:
1. Open the front cover of the CPU.
2. Ensure that the CPU is either switched off, or in the STOP mode.
3. Insert the SIMATIC memory card, as depicted on the CPU, into the slot for the SIMATIC
memory cardStandard, F-CPUs / compact CPUs from article number 6ES751x-xxx02-0AB0/6ES751x1CK01-0AB0:
The slot for the SIMATIC memory card is located on the bottom of the CPU.
Figure 11-1 Slot for the SIMATIC memory card
4. Insert the SIMATIC memory card with light pressure into the CPU, until the SIMATIC
memory card latches.To remove a SIMATIC memory card, follow these steps:
1. Open the front cover.
2. Switch the CPU into STOP mode.
3. Press the SIMATIC memory card into the CPU with light pressure. After audible
unlatching of the SIMATIC memory card, remove it.
Only remove the SIMATIC memory card in POWER OFF or STOP mode of the CPU. Ensure
that no writing functions (online functions with the programming device, e.g. loading/deleting
a block, test functions) are active in STOP mode or were active before POWER OFF.
If you remove the SIMATIC memory card during a write process, the following problems can
occur:
● The data content of a file is incomplete.
● The file is no longer readable, or no longer exists.
● The entire content of the card is corrupted.
Also note the following FAQ on the Internet Inserting and removing the SIMATIC memory card in STOP mode triggers a re-evaluation of
the SIMATIC memory card. The CPU hereby compares the content of the configuration on
the SIMATIC memory card with the backed-up retentive data. If the backed-up retentive data
matches the data of the configuration on the SIMATIC memory card, the retentive data is
retained. If the data differs, the CPU automatically performs a memory reset (which means
the retentive data is deleted) and then goes to STOP.
The CPU evaluates the SIMATIC memory card and indicates this by flashing the RUN/STOP
LED.
