 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5208N576 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS5208N576: | TS5208N576 |
|---|---|---|---|
| Japan: | Japan | COLOR: | GRAY |
| Material: | Iron | Temperature: | 20-120 |
| WIRE: | WIRE | Demention: | 30mm |
TS3103N156
TS5208N576
TS3602N233E8
TS3602N31E8
TS3617N1E1
TS3617N1E2
TS3617N11E1
TS3617N1E3
TS3617N2E4
TS3617N2E5
TS3617N2E6
TS3617N2E7
TS3617N3E10
TS3617N3E8
TS3617N13E8
TS3617N376
TS3617N381
TS3617N3E9
TS3617N13E9
TS3617N40E3
TS3617N47E4
TS3624N1E1
TS3624N21E1
| The Footer Area is used to enter text in order to create the footer of a line layout. | |
| The Page Size area is used to set the number of lines and columns for a line layout. | |
| The Margins area is used to set the margins for the output of a line layout. |
You will find the status bar along the lower edge of the screen. It contains tips on the buttons on the toolbar, on menu commands, and on keyboard settings, for example.
The toolbar is located under the menu bar along the top of the line layout editor. The buttons arranged on the toolbar enable you to access the functionality of the line layout editor quickly and easily.
The standard toolbar contains buttons with the following functions:
The toolbar in the line layout editor is always activated. You cannot hide it.
Line-by-line printing is used in practice for current and synchronous documentation. WinCC allows for "line-by-line printing" on appropriate printers. The output to the printer is only possible via a local, parallel interface on the computer. You can set the page size and margins for each line layout within the permissible limits. Page Size in the Line Layout The page size of a line layout can be set within the following limits: ● You can set between between 20 and 400 lines. ● The number of columns can be between 20 and 400. The value for the number of columns is defined as the number of characters per line.
Because most printers cannot print right up to the edge of the page, the margins must be set accordingly in the line layout. The margins of a line layout can be set within the following limits: ● The value for the margins (left, right, top, bottom) can be between 0 and 30 characters. Printer Settings The number of columns set in a line layout under "Page Size" (= characters per line) must be supported by the printer used. If the number of columns is greater than the number of characters a printer can print per line, a line break is inserted. This overflow of the column text into a new line disturbs the column formatting. To remedy this, a narrower font or a smaller character width must be set for the printer. Setting the font or character width depends on the printer used. Please check the printer manual for further information. Note If the suitable font is not set as the default font on the printer, it will have to be set again each time the printer is reset or switched off and on again.
You can define a different header and footer for each line layout. The number of headers and footers can be between 0 and 10. You can enter any text you like in them. You can output as many headers as the number of lines you have set. You do not have to output the header and footer. Usage The headers and footers are output with each page of the message sequence report. The width of the headers and footers is based on the number of columns (= characters per line) set under "Page Size". Text in the header or footer that is longer than the configured number of columns is truncated at output.
You can define a table for the output of reports and measured values for each line layout. The number and contents of the columns are defined using the "Selection..." button. The number of columns can be between 1 and 40 and depends on the number of selected message blocks. Usage The configured columns with the associated headings and the set column width are displayed in the Table area. You can configure the column heading and the column width for each column separately. Use the "Selection..." button to open the "Alarm Logging Runtime: Report - Table Column Selection" dialog. In this dialog, you can select the server(s) whose reports you want to log. You can assign the message blocks to the table columns and set the filter criteria for the alarm output. These changes are only effective for the output of the message sequence report and are not written back to the alarm logging. You can find additional information in the sections "Outputting Runtime Data with the Message Sequence Report" and "Changing Output Options for the Message Sequence Report".
