 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5013N63 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS5013N63: | TS5013N63 |
|---|---|---|---|
| Japan: | Japan | Material: | Iron |
| Color: | Black | Temperature: | 20-120 |
| Demention: | 50mm |
TS3103N156
TS5013N63
TS-5208N130
TS5207N76
TS5246N160
TS5312N616-2000C-T
TS5312N616
TS5217N530
DIH35-5000C/T-P8-L6-5V
OIH100-1024C/T-P2-12V
TS5233N430
DIH48-6000C/T-P8-L6-5V
TS5246N430
TS1857N112
TS5213N551
TS5214N364
TS5312N512-2000C/TOSE.5KN-6-12-108
TS5146N11
BKO-NC6214
TS5214N500
48-2500PA-L6-5V
TS5205N4540IH60-8192C/T-P8-L6-5V
TS3699N172
TS3653N3E8
For information on how to enter the appropriate settings and installation in your operating system, please refer to your Windows documentation.
In order to configure efficiently, please note the following: ● Always configure for one language at a time if possible. ● Set the Runtime language to be the language to be configured. The editors always start with the set Runtime language as the configuration language.
To change the WinCC GUI language, the language must have been installed with WinCC. Select "Tools > Language" in WinCC Explorer to change the WinCC user interface language. In the selection window, you will be offered all installed WinCC languages with the exception of the current WinCC GUI languag
Following the change, the operating elements, menus and dialogs in WinCC Configuration are changed to the selected language.
If the current WinCC GUI language is not the same as the operating system user interface language, the standard dialog elements of certain WinCC editors remain unchanged and continue to be displayed in the operating system language. This applies to standard buttons such as "Cancel", and standard system dialogs such as "Save as", "Open file" or "Print". In order to display these elements in the desired language, you need to set the operating system language to the same language as you are using for the WinCC GUI language
If you are configuring for Asian languages and the current WinCC user interface language does not correspond to the operating system language, a large part of the Asian user interface will not be displayed correctly in WinCC < V7.2.
You can set the configuration language separately for the "Graphics Designer" editor and the "Alarm Logging" editor. To change the configuration language, open the editor concerned and select the menu command "View > Language" or "View > Input language". A selection window offers you all languages available on your system. Following the change, all configured texts are displayed in the selected configuration language. If you have not configured the language yet, all texts in the "Graphics Designer" editor will be displayed as "???", and the "Alarm Logging" editor will not display any texts. The set configuration language is displayed in the status bar of the Graphics Designer editor. Setting Runtime language and Runtime standard language Set the Runtime language and Runtime standard language in WinCC during centralized configuration in the starting configuration of the Runtime computer. For more information, refer to "How to Set the Runtime Computer Starting Configuration
| In WinCC you can set a custom font for each configured language | |
| The fonts that you wish to use must be installed in your operating system | |
| m. You need special fonts if you use project |
