 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS2228N33E1 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS2228N33E1: | TS2228N33E1 |
|---|---|---|---|
| Material: | Iron | Color: | Black |
| Japan: | Japan | Temperature: | 50-80 |
| Wire: | Wire |
TS3103N156
TS2228N33E1
TS3166
TS3166N43
TS3212N32
TS3214N12
TS3214N13
TS3214N15
TS3214N16
TS3214N44
TS3218
TS3218N42
TS3218N5
TS3250E12
TS3275N125
TS3153N15E18
TS3602N213E8
TS3602N233E8
TS3602N31E8
| You can read detailed diagnostic messages using SFCs in the user program (refer to section | |
| Diagnostics data of SM 338; POS-INPUT (Page 596)). | |
| You can view the cause of the error in the module diagnostics data in STEP 7 (refer to the |
STEP 7 Online Help.)
Diagnostic message using the SF LED
The SM 338 indicates errors at its SF LED (group error LED.) The
SF LED lights up when the SM 338 generates a diagnostic message. It goes dark after all
error states are cleared.
The SF LED also lights up to indicate external errors (short-circuit at the encoder supply),
regardless of the CPU operating state (at POWER ON.)
The SF LED lights up temporarily at startup, during the self test of SM 338.
The table below provides an overview of the diagnostic messages of SM 338; POS-INPUT.
Table 7- 5 Diagnostic messages of SM 338; POS INPUT
Module error Any, the module has detected an error.
Internal error Module has detected an error within the
automation system.
External error Module has detected an error outside of the
automation system.
Channel error Indicates that only specific channels are
faulty.
External auxiliary voltage
missing
Supply voltage L+ of the module is missing Feed supply L+
Module not programmed Module requires information whether it
should operate with default system parameters
or user parameters.
Message present after power on, until the
CPU has completed the transfer of parameters;
configure the module as required.
Incorrect parameters One parameter, or the combination of parameters,
is not plausible
Program the module
Channel information available
Channel error; module can provide additional
channel information.
Watchdog time-out Infrequent high electromagnetic interference Eliminate interference
Channel error Any, the module has detected an error at the
encoder input.
Configuration / programming
error
Illegal parameter transferred to module Program the moduleExternal channel error
(encoder error)Wire-break at encoder cable, encoder cable
not connected, or encoder defective.Check connected encoder
This chapter describes the interrupt reaction of SM 338; POS-INPUT. The SM 338 cantrigger diagnostic interrupts.
For detailed information on the OBs and SFCs mentioned below, refer to the STEP 7 OnlineHelp.
Enabling interrupts
There is no default interrupt setting, i.e. interrupts are disabled if not set accordingly. Youconfigure the interrupt enable parameter in STEP 7 (refer to chapter "ParametrizationSM 338 POS-INPUT (Page 505)").
Diagnostic interruptIf you have enabled diagnostic interrupts, the incoming error events (initial occurrence of the
error) and outgoing error events (message after troubleshooting) are reported by means of
interrupts.The CPU interrupts user program execution, and executes diagnostic interrupt OB82.
You can call SFC 51 or 59 in OB82 in the user program to view detailed diagnostic dataoutput by the module.
Diagnostics data remain consistent until the program exits OB 82. The moduleacknowledges the diagnostic interrupt when the program exits OB82
Dimensions W x H x D (mm) 40 x 125 x 120Weight Approx. 235 g
