TAMAGAWA TS5314N510-2500C/T TS5314N510-2500C/T TS5314N510-2500C/T TS5314N510-2500C/T

Guang Zhou Lai Jie Electric Co.,LTD

TS5314N510-2500C/T

TS4503N1000E200

TS4503N1007E200

TS4503N1022E100

TS4503N1022E200

TS4503N1202E200

TS4503N1205E200

TS4503N1828E100

TS4503N2000E100

TS4503N2070E100

TS4503N2202E200

TS4503N2036E501

TS4506N1202E200

TS4507N1002E200

TS4507N1202E200

TS4507N1205E200

TS4507N1229E200

TS4507N2000E100

TS4507N2070E100

TS4507N2405E200

TS4507N6205E200

ENO is always TRUE for the shift operations. OUT value before first shift: 1110 0010 1010 1101
After first shift left: 1100 0101 0101 1010
After second shift left: 1000 1010 1011 0100
After third shift leftUse the rotate instructions (ROR and ROL) to rotate the bit pattern of
parameter IN. The result is assigned to parameter OUT. Parameter N
defines the number of bit positions rotated.
 ROR: Rotate bit pattern right
 ROL: Rotate bit pattern left
1 For LAD and FBD: Click the "???" and select the data types from the drop-down me
Byte, Word, DWord Bit pattern to rotate
N UInt Number of bit positions to rotate
OUT Byte, Word, DWord Bit pattern after rotate operation
● For N=0, no rotate occurs. The IN value is assigned to OUT.
● Bit data rotated out one side of the target value is rotated into the other side of the target
value, so no original bit values are lost.If the number of bit positions to rotate (N) exceeds the number of bits in the target value
(8 for Byte, 16 for Word, 32 for DWord), then the rotation is still performed.
● ENO is always TRUE following execution of the rotate instructions.
OUT value before first rotate: 0100 0000 0000 0001
After first rotate right: 1010 0000 0000 0000
After second rotate right: Use the date and time instructions to program calendar and time calculations.
● T_CONV converts the data type of a time value: (Time to DInt) or (DInt to Time)
● T_ADD adds Time and DTL values: (Time + Time = Time) or (DTL + Time = DTL)
● T_SUB subtracts Time and DTL values: (Time - Time = Time) or (DTL - Time = DTL)
● T_DIFF provides the difference between two DTL values as a Time value: DTL - DTL =
Time
● T_COMBINE combines a Date value and a Time_and_Date value to create a DTL value
For information about the structure of the DTL and Time data, refer to the section on the
Time and Date data types (DInt, Time Input Time value or DInt value
OUT OUT DInt, Time Converted DInt value or Time value T_ADD adds the input IN1 value (DTL or Time data types) with the input
IN2 Time value. Parameter OUT provides the DTL or Time value result.
Two data type operations are possible:
 Time + Time = Time
 DTL + Time = DTL
out := T_SUB(
in1:=_variant_in,
in2:=_time_in);
T_SUB subtracts the IN2 Time value from IN1 (DTL or Time value).
Parameter OUT provides the difference value as a DTL or Time data
type. Two data type operations are possible:
 Time - Time = Time
 DTL - Time = DTL
1 For LAD and FBD: Click the "???" and select the data types from the drop-down menu.
IN11 IN DTL, Time DTL or Time value
IN2 IN Time Time value to add or subtract
OUT OUT DTL, Time DTL or Time sum or difference
1 Select the IN1 data type from the drop-down list available below the instruction name. The IN1 data type selection also
sets the data type of parameter OUT
out := T_DIFF(
in1:=_DTL_in,
in2:=_DTL_in);
T_DIFF subtracts the DTL value (IN2) from the DTL value (IN1).
Parameter OUT provides the difference value as a Time data type.
 DTL - DTL = Time
Condition codes: ENO = 1 means no error occurred. ENO = 0 and parameter OUT = 0
errors:
● Invalid DTL value