TAMAGAWA TS5314N510 TS5314N510 TS5314N510 TS5314N510 TS5314N510 TS5314N510

Guang Zhou Lai Jie Electric Co.,LTD

TS5314N510-2500C/T

TS4507N8029E200

TS4509N1002E200

TS4509N1202E200

TS4509N1831E200

TS4509N2002E200

TS4509N2405E200

TS4509N7000E100

TS4514N1021E200

TS4514N1407E200

TS4514N1828E200

TS4514N2002E200

TS4514N2405E200

TS4515N1202E200

TS4515N2405E200

TS4515N6000E200

TS4602N1000E200

TS4602N6321E100

TS4603N1000E100

ISO on TCP (RFC 1006)
● Transport Control Protocol (TCP)As an IO controller using PROFINET RT, the CPU provides the following support on the
local PN network or through a PN/PN coupler (link). Refer to PROFIBUS and PROFINET
InternationaIn V3.0, the communicates with up to 16 PN devices.
● In V2.2, the communicates with up to 8 PN devices. ROFIBUS is used for exchanging data through the user program with other
communications partners through the PROFIBUS network:
● With CM 1242-5, the CPU operates as a PROFIBUS DP slave.
● With CM 1243-5, the CPU operates as a PROFIBUS DP master class1.
● In V3.0, PROFIBUS DP Slaves, PROFIBUS DP Masters, and ASi (the 3 left-side
communication modules) and PROFINET are separate. n V2.2, The CPU provides the following PROFINET and PROFIBUS support:
– A total of 16 devices and 256 submodules, with a maximum of 16 PROFIBUS DP
slave devices and 256 submodules (if no PROFINET IO devices or submodules are
configured).
Note
In V2.2, the total of 16 PROFINET and PROFIBUS devices includes the following:
? The PROFIBUS DP slave modules attached by the PROFIBUS DP master
(CM 1243-5)
? Any PROFIBUS DP slave module (CM 1242-5) connected to the CPU
? Any PROFINET device connected to the CPU over the PROFINET port
For example, a configuration with three PROFIBUS CMs (one CM 1243-5 master and
two CM 1242-5 slave modules) will reduce the maximum number of slave modules
that can be accessed by the PROFIBUS DP Master (CM 1243-5) to 14.

AS-i: The CM 1243-2 AS-i Master allows the attachment of an AS-i network to
an CPU.
● CPU-to-CPU S7 communication
Teleservice communication
In TeleService via GPRS, an engineering station on which STEP 7 is installed communicates
via the GSM network and the Internet with a SIMATIC station with a CP 1242-7.
The connection runs via a telecontrol server that serves as an intermediary and is connected
to the Internet.
10.1 Number of asynchronous communication connections supported
The CPU supports the following maximum number of simultaneous, asynchronous
communication connections for PROFINET and PROFIBUS:
● 8 connections for Open User Communications (active or passive): TSEND_C, TRCV_C,
TCON, TDISCON, TSEND, and TRCV.
● 3 CPU-to-CPU S7 connections for server GET/PUT data
● 8 CPU-to-CPU S7 connections for client GET/PUT data
HMI connections: The CPU provides dedicated HMI connections to support up to 3 HMI
devices. (You can have up to 2 SIMATIC Comfort panels.) The total number of HMI is
affected by the types of HMI panels in your configuration. For example, you could have
up to three SIMATIC Basic panels connected to your CPU, or you could have up to two
SIMATIC Comfort panels with one additional Basic panel.
● PG connections: The CPU provides connections to support 1 programming device (PG).
● Webserver (HTTP) connections: The CPU provides connections for the Webserver. A Local / Partner (remote) connection defines a logical assignment of two communication
partners to establish communication services. A connection defines the following:
● Communication partners involved (One active, one passive)