TAMAGAWA TS5314N510-2500C/T TS5314N510-2500C/T TS5314N510-2500C/T TS5314N510-2500C/T

Guang Zhou Lai Jie Electric Co.,LTD

TS5314N510-2500C/T

TS4507N8029E200

TS4509N1002E200

TS4509N1202E200

TS4509N1831E200

TS4509N2002E200

TS4509N2405E200

TS4509N7000E100

TS4514N1021E200

TS4514N1407E200

TS4514N1828E200

TS4514N2002E200

TS4514N2405E200

TS4515N1202E200

TS4515N2405E200

TS4515N6000E200

TS460TS4603N1000E100

TS4603N1000E200

TS4603N1532E200

TS4603N1700E200

TS4603N2002E200

TS4603N7002E200

TS1505N55 

TS1508N211

TS1508N255

TS1508N257

TS1508N260

TS1613N200

TS16N13E12

TS16N18E11

TS2013N191E26

TS2014N181E32

TS2014N311E32

TS2014N312E32

TS2018N303E51

TS20E12

TS20N2E112N1000E200

TS4602N6321E100

TS4603N1000E100

uppercase A to F can be converted. Any other character will be converted to zero.
8-bit ASCII coded characters are converted to 4-bit hexadecimal nibbles. Two ASCII
characters can be stored in a single byte.
The IN and OUT parameters specify byte arrays and not hexadecimal String data. ASCII
characters are converted and placed in the hexadecimal output in the same order as they
are read. If there are an odd number of ASCII characters, then zeros are put in the rightmost
nibble of the last converted hexadecimal digit. Pointer to input byte array
N IN UInt Number of bytes to convert (each input byte has two 4-bit nibbles and
produces 2N ASCII characters)
RET_VAL OUT Word Execution condition code
OUT OUT Variant Pointer to ASCII character byte array
Conversion begins at the location specified by parameter IN and continues for N bytes. Each
4-bit nibble converts to a single 8-bit ASCII character and produces 2N ASCII character
bytes of output. All 2N bytes of the output are written as ASCII characters 0 to 9 through
uppercase A to F. The parameter OUT specifies a byte array and not a string.
Each nibble of the hexadecimal byte is converted into a character in the same order as they
are read in (left-most nibble of a hexadecimal digit is converted first, followed by the rightmost
nibble of that same byte). Invalid ATH input character: A character was found that was not an ASCII character 0-
9, lowercase a-f, or uppercase A-F
FALSE
8101 Illegal or invalid input pointer, for example, an access to a DB that does not exist. FALSE
8120 Input string is an invalid format, i.e., max= 0, max=255, current>max, or grant length in
pointer < max
FALSE
8182 Input buffer is too small for N FALSE
8151 Data type not allowed for input buffer FALSE
8301 Illegal or invalid output pointer, for example, an access to a DB that does not exisOutput string is an invalid format, i.e., max= 0, max=255, current>max, or grant length
in pointer < max
FALSE
8382 Output buffer is too small for N FALSE
8351 Data type not allowed for output buffeYour control program can use the following string and character instructions to create
messages for operator display and process logs.
String Input string
OUT OUT Int, DInt, Real, LReal Number of valid characters of IN string
Table 8- 51 ENO status
ENO Condition OUT
1 No invalid string condition Valid string length
Current length of IN exceeds maximum length of IN
Maximum length of IN does not fit within allocated memory range
0
Maximum length of IN is 255 (illegal length) CONCAT (concatenate strings) joins string parameters IN1 and
IN2 to form one string provided at OUT. After concatenation,
String IN1 is the left part and String IN2 is the right part of the
combined string.
No errors detected Valid characters
Resulting string after concatenation is larger than maximum length of OUT
string
Resulting string characters are
copied until the maximum length
of the OUT is reached
Current length of IN1 exceeds maximum length of IN1, current length of
IN2 exceeds maximum length of IN2, or current length of OUT exceeds
maximum length of OUT (invalid string)
Maximum length of IN1, IN2 or OUT does not fit within allocated memory
range
0
Maximum length of IN1 or IN2 is 255, or the maximum length of OUT is 0
or 255 LEFT (Left substring) provides a substring made of the first L
characters of string parameter IN.
 If L is greater than the current length of the IN string, then the entire
IN string is returned in OUT.
 If an empty string is the input, then an empty string is returned in
OUT.
out := MID(in, L, p); MID (Middle substring) provides the middle part of a string. The middle
substring is L characters long and starts at character position P
(inclusive).
If the sum of L and P exceeds the current length of the string
parameter IN, then a substring is returned that starts at character
position P and continues to the end of the IN string.
out := RIGHT(in, L); RIGHT (Right substring) provides the last L characters of a string.
 If L is greater than the current length of the IN string, then the entire
IN string is returned in parameter OUT.