TAMAGAWA TS5314N510 TS5314N510 TS5314N510 TS5314N510 TS5314N510 TS5314N510

 We can sell the products of TAMAGAWA at a davantage price

Guang Zhou Lai Jie Electric Co.,LTD

Front connectors The purpose of the front connectors is to wire the I/O modules.
The front connectors for technology and analog modules must be
supplemented with a shielding bracket, power supply element, and
shielding clamp. The components are included in the scope of delivery
of the technology modules, analog modules and compact CPUs (for
onboard I/O) and can be ordered as Accessories/spare parts
(Page 335)accessories.
There are front connectors with screw terminals and push-in terminals
for 35 mm modules, and with push-in terminals for 25 mm modules.
The front connectors for 25 mm modules are included in the scope of
delivery of the I/O modules and compact CPUs (for onboard I/O).
Four potential bridges and one cable tie are included in the scope of
delivery of the front connectors for 35 mm modules. The front connectors for 25 mm modules have no potential bridges due to the compact module design.You jumper two terminals with potential bridges.
The potential bridges are included in the scope of delivery of the front
connector and can be ordered as Accessories/spare parts (Page 335).
The front connectors for 25 mm modules have no potential bridges.
Therefore, you should also observe the information in the product
manual for the respective digital or analog module. The shield bracket is an insertable bracket for modules with EMCcritical signals (e.g. analog modules, technology modules), and (together with the shield clamp) permits the low impedance application of
shielding with minimal installation times.
The shield bracket is included in the scope of delivery of the analog
modules, technology modules and compact CPUs (for onboard I/O)
and can be ordered as Accessories/spare parts (Page 335)The shield clamps are used to attach cable shielding to the shielding
bracket.
The shield clamp is included in the scope of delivery of the analog
modules, technology modules and compact CPUs (for onboard I/O)
and can be ordered as Accessories/spare parts (Page 335)The power supply element is inserted in the front cable connector, and
serves to supply power to modules with EMC-critical signals (analog
modules, technology modules).
The power supply element (connection technology: screw terminal) is
included in the scope of delivery of the analog and technology modules and can be ordered as Accessories/spare parts (Page 335).
The labeling strips are used to label the modules for specific plants.
You can label the labeling strips using a machine. The labeling strips
are available in various colors:
• Al gray: Non-fail-safe modules
• Yellow: Fail-safe modules
The labeling strips are included in the scope of delivery of the I/O
modules and compact CPUs (for onboard I/O). Additional labeling
strips can be ordered as Accessories/spare parts (Page 335).
4-pole connection plug
for supply voltage of
the CPU/interface
module
The supply voltage is supplied by means of the 4-pole connectionThe supply voltage is supplied by means of the 4-pole connection
plug.The system power supply is a diagnostics-capable power supply
module, that can be connected with the backplane bus using a U
connector.
A system power supply is required, if the power fed from the
CPU/interface module into the backplane bus is not sufficient to supply the connected modules with power.
System power supplies are available in various models:
• PS 25W 24V DC
• PS 60W 24/48/60V DC
• PS 60W 24/48/60V DC HF
• PS 60W 120/230V AC/DC
A power cable connector with coding element and U connector is
included in the scope of delivery of the system power supply and may
be ordered as spare part.
Load current supply
(PM)
The system power supply (PS), central modules (CPU), and input and
output circuits of the I/O modules are supplied with 24 V DC through
the load current supply (PM).
If you are using load current supplies, we recommend the devices
from our series. These devices can be mounted on the
mounting rail.
Load current supplies are available in various models: