 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5314N510 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| TS5314N510: | TS5314N510 | Japan: | Japan |
| Color: | Black | Temperature: | 20-90 |
| Wire: | Wire | Dimension: | 70mm |
Guang Zhou Lai Jie Electric Co.,LTD
TS5314N510-2500C/T
TS4507N8029E200
TS4509N1002E200
TS4509N1202E200
TS4509N1831E200
TS4509N2002E200
TS4509N2405E200
TS4509N7000E100
TS4514N1021E200
TS4514N1407E200
TS4514N1828E200
TS4514N2002E200
TS4514N2405E200
TS4515N1202E200
TS4515N2405E200
TS4515N6000E200
TS460TS4603N1000E100
TS4603N1000E200
TS4603N1532E200
TS4603N1700E200
TS4603N2002E200
TS4603N7002E200
TS1505N55
TS1508N211
TS1508N255
TS1508N257
TS1508N260
TS1613N200
TS16N13E12
TS16N18E11
TS2013N191E26
TS2014N181E32
TS2014N311E32
TS2014N312E32
TS2018N303E51
TS20E12
TS20NTS20N2E11
TS2142N1E63
TS2151N1E26
TS2151N1E45
TS2151N11E45
TS2640N321E64
TS2641N31E64
TS2650N1E78
TS2650N11E78
TS2650N101E78
TS2651N111E78
TS2651N181E78
TS5000N532
TS5000N632
TS5003N632
TS5005N122
TS5007N122
TS5007N6352E112N1000E200
TS4602N6321E100
TS4603N1000E100
he CPU calculates motion tasks in "slices" or segments of 10 ms.
| executed, the next slice is waiting in the queue to be executed. If you interrupt the motion task on an axis (by executing another new motion task for that axis), |
for the "Axis" technological object.The PTO requires the internal functionality of a high-speed counter (HSC). This means the |
| the new motion task may not be executed for a maximum of 20 ms (the remainder of the current slice plus the queued slice). |
corresponding high-speed counter cannot be used elsewhere. |
| STEP 7 provides the configuration tools, the commissioning tools, and the diagnostic tools | The assignment between PTO and HSC is fixed. |
When PTO1 is activated, it will be
connected to HSC1. If PTO2 is activated, it will be connected to HSC2. This is only true for
V1.0, V2.0, V2.1, and V2.2 CPUs. V3.0 CPUs do not have this restriction.
You cannot monitor the current value (for example, in ID 1000) when pulses are occurring.
Configures the following properties of the "Axis" technology object:
Selection of the PTO to be used and configuration of the drive interface
Properties of the mechanics and the transmission ratio of the drive (or machine or system)
Properties for position limits, dynamics, and homing
Save the configuration in the data block of the technology object.
Commissioning Tests the function of your axis without having to create a user program. When the tool is started,
the control panel will be displayed. The following commands are available on the control panel:
Enable and disable axis
Move axis in jog mode
Position axis in absolute and relative terms
Home axis
Acknowledge errors
The velocity and the acceleration / deceleration can be specified for the motion commands. The
control panel also shows the current axis status.
Diagnostics Monitors of the current status and error information for the axis and drive.
After you create the technological object for the
axis, you configure the axis by defining the basic
parameters, such as the PTO and the configuration
of the drive interface. You also configure the other
properties of the axis, such as position limits,
dynamics, and homing. You may have to adapt the values of the input parameters of motion control instructions to
the new dimension unit in the user program. Configure the properties for the drive signals, drive
mechanics, and position monitoring (hardware and
software limit switches). You configure the motion dynamics and the
behavior of the emergency stop command. Use the "Commissioning" control panel to test the functionality independently from your user
program.
