TAMAGAWA TS5667N420 TS5667N420 TS5667N420 TS5667N420 TS5667N420v TS5667N420

Guang Zhou Lai Jie Electric Co.,LTD

TS5667N420

1500PPR

PULSE

GENERATORRP-482E,750PPR

ROTALY

ENCODER

RP-112A-T1,750PPR

ROTALY

ENCODER

RP-112A-T1,1500PPR

ROTALY

ENCODER

RP-112A-T1,3000PPR

ROTALY

ENCODER

RP-132,1500PPR

ROTALY

ENCODER

RP-446Z,750PPR

ROTALY

ENCODER

M-52004

RP872ZL

2048PPR

ROTALY

ENCODER

RP-132A-T1,750PPR

ROTALY

Insert the program card into the CPU. If the CPU is in RUN mode, the CPU goes to STOP
mode. The maintenance (MAINT) LED flashes to indicate that the memory card needs to
be evaluated.
2. Power-cycle the CPU to evaluate the memory card. Alternative methods for rebooting the
CPU are to perform either a STOP-to-RUN transition or a memory reset (MRES) from
STEP 7.
3. After the CPU reboots and evaluates the program card, the CPU erases the internal load
memory of the CPU.
The CPU then goes to the start-up mode (RUN or STOP) that you configured for the CPU.
The program card must remain in the CPU. Removing the program card leaves the CPU with
no program in internal load memory.
WARNING
If you remove the program card, the CPU loses its external load memory and generates an
error. The CPU goes to STOP mode and flashes the error LED.
Control devices can fail in an unsafe condition, resulting in unexpected operation of
controlled equipment. Such unexpected operations could result in death or serious injury to
personnel, and/or damage to equipment. Electrostatic discharge can damage the memory card or the receptacle on the CPU.
Make contact with a grounded conductive pad and/or wear a grounded wrist strap
whenever you handle the memory card. Store the memory card in a conductive container. From this Web site, navigate to Automation
Technology > Automation Systems > SIMATIC Industrial Automation Systems > PLC >
Modular controllers SIMATIC S7 > SIMATIC . From there continue navigating to the
specific type of module that you need to update. Under "Support", click the link for "Software
Downloads" to proceed.
Alternatively, you can access the downloads Web page If a memory card is reformatted using the Microsoft Windows formatter utility, then
the memory card will no longer be usable by a CPU.To download the firmware update to your memory card, follow these steps:
1. Insert a blank SIMATIC MC 24 MB memory card into an SD card reader/writer attached
to your computer.
You can reuse a SIMATIC memory card that contains a user program or another firmware
update, but you must delete some of the files on the memory card.
CAUTION
Do NOT delete the hidden files "__LOG__" and "crdinfo.bin" from the memory card.
The "__LOG__" and "crdinfo.bin" files are required for the memory card. If you delete
these files, you cannot use the memory card with the CPU.
To reuse a memory card, you must delete the "S7_JOB.S7S" file and any existing "Data
Logs" folders or any folder (such as "SIMATIC.S7S" or "FWUPDATE.S7S") before
downloading the firmware update. However, do not delete the files "__LOG__" and
"crdinfo.bin". (These files are typically hidden and are required.) Use Windows Explorer to
display the contents of the memory card and to delete the file and folders.
2. Select the self-extracting file (.exe) for the firmware update that corresponds to your
module, and download it to your computer. Double-click the update file, set the file
destination path to be the root directory of the SIMATIC memory card, and start the
extraction process. After the extraction is complete, the root directory (folder) of the
memory card will contain a "FWUPDATE.S7S" directory and the "S7_JOB.S7S" fileInstalling the firmware update will cause the CPU to go to STOP mode, which could affect
the operation of an online process or machine. Unexpected operation of a process or
machine could result in death or injury to personnel and/or property damage.
Before inserting the memory card, always ensure that the CPU is offline and in a safe state.
1. Insert the memory card into the CPU. If the CPU is in RUN mode, the CPU then goes to
STOP mode. The maintenance (MAINT) LED flashes to indicate that the memory card
needs to be evaluated.
2. Power-cycle the CPU to start the firmware update. Alternative methods for rebooting the
CPU are to perform either a STOP-to-RUN transition or a memory reset (MRES) from
STEP 7. To complete the firmware upgrade for the module, you must ensure that the external 24
VDC power to the module remains on.
After the CPU reboots, the firmware update starts. The RUN/STOP LED alternately
flashes green and yellow to indicate that the update is being copied. When the
RUN/STOP LED turns on (solid yellow) and the MAINT LED flashes, the copy process
has finished. You must then remove the memory card.
3. After removing the memory card, reboot the CPU again (either by restoring power or by
the alternative methods for rebooting) to load the new firmware.
The user program and hardware configuration are not affected by the firmware update.
When the CPU is powered up, the CPU enters the configured start-up state. (If the startup
mode for your CPU was configured to "Warm restart - mode before POWER OFF", the CPU
will be in STOP mode because the last state of the CPU was STOP.)If your hardware configuration contains multiple modules that correspond to a single
firmware update file on the memory card, the CPU applies the updates to all applicable
modules (CM, SM, SB) in configuration order, that is, by increasing order of the module
position in Device Configuration in STEP 7.