TAMAGAWA TS5778N155 TS5778N155 TS5778N155 TS5778N155 TS5778N155 TS5778N155

Guang Zhou Lai Jie Electric Co.,LTD

TS5778N155

TS5305N616

TS5008N12238

TS5214N564

TS5212N569

TS2651N111E78

TS2014N181E32

TS-5208N130

TS5207N76

TS5246N160

TS5312N616-2000C-T

TS5312N616

TS5217N530

DIH35-5000C/T-P8-L6-5V

OIH100-1024C/T-P2-12V

TS5233N430

DIH48-6000C/T-P8-L6-5V

TS5246N430

TS1857N112

"9". The result is placed at the location specified in parameter OUT.
String data must be initialized before execution as a valid string in memory.
The FORMAT parameter for the STRG_VAL instruction is defined below. The unused bit
positions must be set to zero.
Table 8- 26 Format of the STRG_VAL instruction f = Notation format 1= Exponential notation
0 = Fixed point notation
r = Decimal point format 1 = "," (comma character)
0 = "." (period character) 0000 (default) "."
0001
Fixed point
","
0002 "."
0003
Exponential
","
0004 to FFFF Illegal values
Rules for STRG_VAL conversion:
● If the period character "." is used for the decimal point, then commas "," to the left of the
decimal point are interpreted as thousands separator characters. The comma characters
are allowed and ignored.
● If the comma character "," is used for the decimal point, then periods "." to the left of the
decimal point are interpreted as thousands separator characters. These period
characters are allowed and ignored.
● Leading spaces are ignored. Converts an integer, unsigned integer, or floating point
value to the corresponding character string
representationSInt, Int, DInt, USInt, UInt,
UDInt, Real, LReal
Value to convert
SIZE IN USInt Number of characters to be written to the OUT string
PREC IN USInt The precision or size of the fractional portion. This does
not include the decimal point.
FORMAT IN Word Output format options
P IN UInt, Byte, USInt IN: Index to the first OUT string character to be replaced
(first character = 1)
OUT OUT String The converted stringThe value represented by parameter IN is converted to a string referenced by parameter
OUT. The parameter OUT must be a valid string before the conversion is executed.
The converted string will replace characters in the OUT string starting at character offset
count P to the number of characters specified by parameter SIZE. The number of characters
in SIZE must fit within the OUT string length, counting from character position P. This
instruction is useful for embedding number characters into a text string. For example, you
can put the numbers "120" into the string "Pump pressure = 120 psi".Parameter PREC specifies the precision or number of digits for the fractional part of thestring. If the parameter IN value is an integer, then PREC specifies the location of thedecimal point. For example, if the data value is 123 and PREC = 1, then the result is "12.3".The maximum supported precision for the Real data type is 7 digits.
If parameter P is greater than the current size of the OUT string, then spaces are added, upto position P, and the result is appended to the end of the string. The conversion ends if themaximum OUT string length is reached.The FORMAT parameter for the VAL_STRG instruction is defined below. The unused bit
positions must be set to zero.Table 8- 30 Format of the VAL_STRG instructions = Number sign character 1= use sign character "+" and "-"0 = use sign character "-" only
f = Notation format 1= Exponential notation0 = Fixed point notationr = Decimal point format 1 = "," (comma character)0 = "." (period character) Parameter OUT string format rules:
● Leading space characters are added to the leftmost part of the string when the converted
string is smaller than the specified size.