 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5208N141E78 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | Temperature: | 20-80 |
| Wire: | Wire | Dimension: | 60mm |
| TS5208N141E78: | TS5208N141E78 |
Guang Zhou Lai Jie Ele
| evaluate the new program that was transferred to internal load memory. | |
| The CPU then goes to the start-up mode (RUN or STOP) that you configured for the project. | |
| Note You must remove the transfer card before setting the CPU to RUN mode |
ctric Co.,LTD
TS5208N141E78
TS3630N1303E9
TS3630N1214E3
TS5013N60
TS5013N61
TS5016N60
TS5013N63
TS5013N64
TS5016N61
TS5013N66
TS5016N63
TS5016N64
TS5017N60
TS5019N60
TS5420N60
TS5778N155
TS5013N68
Electrostatic discharge can damage the memory card or the receptacle on the CPU.
Make contact with a grounded conductive pad and/or wear a grounded wrist strap when
you handle the memory card. Store the memory card in a conductive container. Check that the memory card is not write-protected. Slide the protection
switch away from the "Lock" position.
Before you copy any program elements to the program card, delete any
previously saved programs from the memory card. When used as a program card, the memory card is the external load memory of the CPU. If
you remove the program card, the internal load memory of the CPU is empty.
Note
If you insert a blank memory card into the CPU and perform a memory card evaluation by
either power cycling the CPU, performing a STOP to RUN transition, or performing a
memory reset (MRES), the program and force values in internal load memory of the CPU are
copied to the memory card. (The memory card is now a program card.) After the copy has
been completed, the program in internal load memory of the CPU is then erased. The CPU
then goes to the configured startup mode (RUN or STOP).
Always remember to configure the startup parameter of the CPU (Page 110) before copying
a project to the program card. To create a program card, follow these steps:
1. Insert a blank SIMATIC memory card into an SD card reader/writer attached to your
computer.
If you are reusing a SIMATIC memory card that contains a user program or a firmware
update, you must delete the program files before reusing the card. Use Windows Explorer
to display the contents of the memory card and delete the "S7_JOB.S7S" file and also
delete any existing "Data Logs" folders and any directory folder (such as "SIMATIC.S7S"
or "FWUPDATE.S7S").
2. In the Project tree (Project view), expand the "SIMATIC Card Reader" folder and select
your card reader.
3. Display the "Memory card" dialog by right-clicking the drive letter corresponding to the
memory card in the card reader and selecting "Properties" from the context menu.
4. In the "Memory card" dialog, select "Program" from the drop-down menu. Add the program by selecting the CPU device (such as PLC_1 [CPU 1214 DC/DC/DC]) in
the Project tree and dragging the CPU device to the memory card. (Another method is to
copy the CPU device and paste it to the memory card.) Copying the CPU device to the
memory card opens the "Load preview" dialog. 6. In the "Load preview" dialog, click the "Load" button to copy the CPU device to the
memory card.
7. When the dialog displays a message that the CPU device (program) has been loaded
without errors, click the "Finish" button. nserting a memory card will cause the CPU to go to STOP mode, which could affect the
operation of an online process or machine. Unexpected operation of a process or machine
