TAMAGAWA TS5320N510 TS5320N510 TS5320N510 TS5320N510 TS5320N510 TS5320N510

TS3103N156

TS5320N510

TS4502N2000E100

TS3503N11E43

TS3653N181E8

TS3684N1E3

TS3631N1E1

TS5146N11

TS5208N510

TS4503N1000E200

TS3062E3

TS3658N3

TS3684N13E8

TS3636N6

TS-5170-N20

TS5208N530

TS4503N1007E200

TS3092N11E12

AU6550N2062

TS3664N1E1

TS3617N1E3

TS3641N1E1

TS5207N530

TS5208N569

Signal module (SM) The TS Adapter allows you to connect various communication interfaces to the PROFINET port of the CPU. You install
the TS Adapter on the left side of the CPU and connect the TS Adapter modular (up to 3) onto the TS Adapter. ③ Battery board Plugs into expansion board interface on front of CPU. Provides long term
backup of realtime clock The CPU supports one plug-in
expansion board:
 A signal board (SB) provides
additional I/O for your CPU.
The SB connects on the front of
the CPU.
 A communication board (CB)
allows you to add another
communication port to your
CPU.
 A battery board (BB) allows you
to provide long term backup of
the realtime clock.
཰
ཱ
② Removable user
wiring connector
① Status LEDs
② Bus connector
Signal modules (SMs) add
additional functionality to the CPU.
SMs connect to the right side of the
CPU.
 Digital I/O
 Analog I/O
 RTD and thermocouple
཰
ཱ
ི
③ Removable user
wiring connector
Communication modules (CMs) ① Status LEDs
and communications processors
(CPs) add communication options
to the CPU, such as for
PROFIBUS or RS232 / RS485
connectivity (for PtP, Modbus or
USS), or the AS-i master. A CP
provides capabilities for other types
of communication, such as to
connect the CPU over a GPRS
network.
 The CPU supports up to 3 CMs
or CPs
 Each CM or CP connects to the
left side of the CPU (or to the
left side of another CM or CP)The following features are new in this release:
● A standard Web server page for performing a CPU firmware update (Page 519)
● The ability to use three PROFIBUS DP CM 1243-5 master modules or three AS-i CM

1243-2 master modules
Note
To use three AS-i modules as masters, you must update the firmware of the AS-i
modules. A variety of new modules expand the power of the CPU and provide the flexibility to
meet your automation needs:
● New and improved CPUs:
– New CPU 1215C DC/DC/DC, CPU 1215C DC/DC/Relay, and CPU 1215C
AC/DC/Relay offer 100 Kbytes of work memory, dual Ethernet, and analog outputs.
– New and improved CPU 1211Cs, CPU 1212Cs, and CPU 1214Cs have faster
processing time, the possibility of 4 PTOs (the CPU 1211C requires a signal board),
increased retentive memory (10 Kbytes), and increased time-of-day hold up time (20
days).
● New I/O signal module: SM 1231 AI 4 x 16 bit provides higher sample rate and increased
number of bits.
● New battery board (BB 1297) offers long term backup of the realtime clock. The BB 1297
is pluggable in the signal board slot of the CPU (firmware 3.0 and later
versions).
To use the new modules you must use STEP 7 V11 SP2 Update 3 or later (Basic or
Professional) and you must download the hardware support package (HSP) for new modules
from the STEP 7 Options > Support Packages menu command. Follow the instructions for
adding modules to the hardware catalog for STEP 7 (TIA Portal) from the Service
and Support SiteBecause visualization is becoming a standard component for most machine designs, the
SIMATIC HMI Basic Panels provide touch-screen devices for basic operator control and
monitoring tasks. All panels have a protection rating for IP65 and have CE, UL, cULus, and
NEMA 4x certification.
Basic HMI Panel Description Technical data
KP 300 Basic PN
3.6" membrane keyboard with 10 freely