 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5850N60 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5850N60: | TS5850N60 |
|---|---|---|---|
| Japan: | Japan | Color: | Black |
| Temperature: | 20-80 | Material: | Iron |
| Wire: | Wire | Dimension: | 50mm |
TS3103N156
TS5850N60
TS3653N13E9
TS5N2E18
TS3630N1E1
TS5013N61
TS2651N111E78
TS4127N1017E215
TS1982N126E6
TS3653N44E8
TS3630N1E2
TS5013N89
TS2651N181E78
TS4127N1017E235
TS1982N128E6
8001231S
TS3653N4E12
TS5013N64
TS3630N2E3
TS5016N
TS5000N532
TS4231N6E17
TS1982N53E6
800123-2R
| cases; can be operated with or | The order number and product version are printed on every module of the |
| ithout a filter.Additional ponents of the such as munications processors, function modules, |
SIMATIC . The firmware version is also printed on the CPUs |
| etc., are described in separate manuals. of the order number and product version | The following figure shows their locations on a module. |
For the product version, an X is entered instead of the valid number. The following
figure shows a module with Product Version 1.An programmable controller consists of a central rack (CR) and one or
more expansion racks (ERs), as required. You can add ERs to pensate for lack
of slots for your application or operate signal modules at remote locations (e.g. in
the immediate vicinity of your process).
When using ERs, you need interface modules (IMs) as well as the additional racks,
and additional power supply modules if necessary. When using interface modules,
you must always use the appropriate partners: you insert a send IM in the CR, and
the matching receive IM in each connected ER (see Reference Manual,
Chapter 6).
Central Rack (CR) and Expansion Rack (ER)
The rack containing the CPU is known as the central rack (CR). The racks
containing modules in the system and connected to the CR are the expansion
racks (ERs).
Shown in Figure 2-1 is a rack with 18 slots configured as a CR.To connect one or more ERs to a CR, you must fit one or more send IMs in the CR.
The send IMs have two interfaces. You can connect one chain of up to four ERs to
each of the two interfaces of a send IM in the CR.
Different IMs are available for local connection and remote connection.
Connecting witha5VSupply
For a local connection with the IM 460-1 and IM 461-1, the 5 V supply voltage is
also transferred via the interface modules. There must therefore be no power
supply module inserted in an ER connected to an IM 460-1/IM 461-1.
Up to 5 A may flow through each of the two interfaces of an IM 460-1. This means
that each ER connected via an IM 460-1/461-1 can be powered with a maximum of
5 A at 5 V. For further details, see the Reference Manual, Chapter 6.When you connect a central rack to expansion racks, you must observe the
following rules: You can connect up to 21 ERs of the to one CR.
• The ERs are assigned numbers to identify them. The rack number must be set
on the coding switch of the receive IM. Any rack number between 1 and 21 may
be assigned. Numbers must not be duplicated.
• You may insert up to six send IMs in one CR. However, only two send IMs with
5 V transfer are allowed in one CR.
• Each chain connected to the interface of a send IM can prise up to four ERs
(without 5 V transfer) or one ER (with 5 V transfer).
