TAMAGAWA TS5208N500 TS5208N500 TS5208N500 TS5208N500 TS5208N500 TS5208N500

TS3103N156

TS5208N500

TS2151N141E9

TS4506N1202E200

TS3134N317

OSE10243158

TS3667N3E8

TS5019N60

TS3653N11E2

TS5313N122

TS2228N33E1

TS4507N1002E200

TS3134N52

OSE5K-6-12-108

TS3667N13E8

TS5013N68

TS3653N12E5

TS5320N632

TS2640N141E172

TS4507N1202E200

OSE5KN-6-12-108

TS3674N37

TS5013N69

TS3653N13E8

TS5420

TS2640N181E100

The integration time is equivalent to the inverse
value of the → noise suppression frequency in msSTEP 7 parameter for analog input modules. The frequency of AC mains may corrupt
measured values, in particular in the low voltage ranges, and when thermocouples are being
used. At this parameter, the user defines the mains frequency prevailing on his system.
Interrupt
SIMATIC S7 knows 28 different priority classes which control user program execution. These
priority classes include interrupts, such as hardware interrupts. When an interrupt occurs, the
operating system automatically calls an assigned organization block, in which the user can
program the desired response (e.g. in an FB).
Interrupt, diagnostics
→ Diagnostic interruptDenotes the maximum deviation of the measured/output value from the ideal linear
relationship between the measured/output signal and the digital value. Defined as a
percentage, relative to the rated range of the analog module.
Logic block
A SIMATIC S7 logic block contains elements of the STEP 7 user program. In contrast, a
data block only contains data. Available logic blocks: Organization Blocks (OBs), Function
Blocks (FBs), Functions (FCs), System Function Blocks (SFBs), System Functions (SFCs).
Measuring range module
Modules installed on analog input modules for the adaptation to different measuring ranges.
Monoflop time
STEP 7 parameter for the SM 338; POS-INPUT position detection module. The monoflop
time is equivalent to interval between two SSI message frames ( → Absolute encoder.)
MPI
Multi-Point Interface. SIMATIC S7 interface for programming devices. Allows central

access
to remote programmable modules (CPUs, CPs), Text Displays und Operator Panels. MPI
nodes can intercommunicate.
OB
→ Organization Block
Operating mode
Definition of this term:
1. selection of a CPU operating state using the mode selector switch or a PG
2. the type of program execution at the CPU
3. an analog input module parameter in STEP 7
Operating state
Operating states known to SIMATIC S7 automation systems: STOP, → STARTUP, RUN and
STOP.
Operational limit
Represents the measuring/output error of an analog module across the entire permissible
temperature range, based on the module's ratingOBs form the interface between the CPU operating system and the user program. The
sequential order of user program execution is defined in the organization blocks.
Parameters

Tag of a → Code block
2. Tag used to set one or several properties of a module. Each module is supplied with
default parameters which users may edit in STEP 7.
PG
→ Programming device
Process image
The CPU saves the signal states of analog IO modules to a process image.
We distinguish between the process image of inputs (PII) and outputs (PIO). The input
modules read the process image of inputs (PII) before the operating system executes the
user program. The operating system transfers the process image of outputs (PIO) to the
output modules at the end of program execution.
Product version
Differentiates products of the same order number. The product version is incremented in the
case of upwards compatible enhancements of functionality, production-specific changes (use
of new components/parts), and fixes.