TAMAGAWA TS5146N11 TS5146N11 TS5146N11 TS5146N11 TS5146N11 TS5146N11

 We can sell the products of TAMAGAWA at a advantage price

TS3103N156

TS5146N11

TS4509N1002E200

TS3218

TS1508N202

TS3684N1E3

TS3653N13E7

TS3624N103E5

TS16N18E11

TS3501N

TS4509N1202E200

TS3218N42

TS1508N77

TS3684N2E6

TS3653N12E6

TS3624N203E5

TS2013N191E26

TS3510N39E10

TS4509N1831E200

TS3218N5

TS1508N85

TS3684N3E8

Open the desired line layout in the line layout editor. 2. Set the number of lines in the "Header" area by using the corresponding control or entering a value. 3. Enter the text for the header in the text box. Note the number of characters per line. Press the return key to insert a line break. 4. Edit the footer in the same way. 5. Save and close the layout. If you enter more lines during input than are specified for "Number of Lines", a message to this effect appears. Only the number of lines set for "Number of Lines" are output. Excess lines are not output.

dialog. In this dialog you can specify the assignment of the message blocks to the columns for output. You also assign the column headings here and set the width of the individual columns for output.

● The desired layout must be open in the line layout editor. ● Alarm logging must be configured.

Click the "Selection..." button to open the "Alarm Logging Runtime: Report Table Column Selection" dialog.

Use the dialog to specify the data for output. You can find additional information in the section "Changing the Output Options for the Message Sequence Report". When you close the dialog, the selected columns and their widths are displayed in characters per line in the "Table" area. If the number of characters per line is too large, a message to this effect appears. 3. Change the time base for times, if necessary. You will find more information in the section "Table Area". 4. Save the line layout, and close the editor

To output a user-specific selection of messages, you can either use a predefined line layout or create your own line layout. The layout must be called in the "@Report Alarm Logging RT Message Sequence" print job. For the output of a message sequence report in a page layout, changes to the output options must be configured in the page layout editor. You will find more information in the section "Creating a User-Defined Message Sequence Report". Note You cannot output a Message Sequence Report in line layout as a file

The desired layout must be open in the line layout editor. ● Message configuration has been carried out in Alarm Logging. Procedure 1. Click the "Selection" button in the "Table" area. The "Alarm Logging Runtime: Report Table Column Selection" dialog is opened. 2. Use the dialog to configure the selection of data for output. You will find a description of the dialog in the section "Data Selection" below. 3. Apply the settings by clicking "OK". 4. Save the line layout, and close the editor

The "Alarm Logging Runtime: Report Table Column Selection" dialog is used to select the data to output in the message sequence report. It allows you to select the servers, message blocks, and filter criteria for alarm output.

Server selection is only necessary if you: ● want to log the messages on a WinCC client, or ● want to log the messages of one server on another server in a distributed system In the "Selection: Server from the Project Data" area, you can select the servers whose messages are to be logged. Only those servers whose "packages" have been loaded are offered. The selected servers are displayed in the window. In the case of a single-user and multi-user project this selection is not required. Dynamization of Server Selection by Means of a WinCC Variable You can dynamize server selection in order to select servers when a project is activated directly before logging is started. The report system reads the value from the variable at runtime. If the variable cannot be read, the configured value is used.