TAMAGAWA TS5000N632 TS5000N632 TS5000N632 TS5000N632 TS5000N632 TS5000N632

TS5000N632

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS5205

N454

TS5205N452

TS5205

N452

TS5207

TS5208

TS5212

TS5213

TS5214

TS5231

TS5217

TS5233

TS5150

TS5300

TS5100

TS5000

TS5080

TS5170

TS5410

TS5200N500

TS5146

TS5270

TS5610

TS5620

TS1857

TS5607

TS5668N20

TS5667N120

TS5667N420

TS5645

TS5647

TS5648

TS5643

TS2223

TS2224

TS2225

8 x DC 24 V/2 A, the module outputs will carry a "1" signal for the duration of ca. 50 µs dueto the circuit structure.Rated load voltage L+ 24 V DCTotal current of outputs (per group)• horizontal mounting positionto 60 °Cmax. 4 A• vertical mounting positionto 40 °Cmax. 4 AElectrical isolation• between channels and the backplane bus yes• between channelsin groups ofyes4Isolation test voltage 500 V DCCurrent consumption• from the backplane bus• from load voltage L+ (no-load)max. 40 mAmax. 60 mA
Power loss of the module typ. 6.8 WStatus, interrupts, diagnosticsStatus display green LED per channelInterrupts noneDiagnostic functions noneActuator selection dataOutput voltage• "1" signalmin. L+ (- 0.8 V)Output current• "1" signal
Rated value
Permitted range
2 A
5 mA to 2.4 A• with "0" signal (residual current) max. 0.5 mAOutput delay (with resistance load• "0" to "1" transition max. 100 μs• "1" to "0" transition max. 500 μsLoad resistance range 12 Ω to 4 kΩLamp load max. 10 WWiring two outputs in parallel• for redundant load control supported (only outputs of the same group)• forperformance increase not supportedControl of a digital input supportedSwitching frequency• with resistiveload max. 100 Hz• with inductive load to IEC 947-5-1, DC 13 max. 0.5 Hz• with lamp load max. 10 HzInternal limiting of the inductive shutdown voltage to typ. L + (-48 V)Short-circuit protection of the outputyes, electronic
• Threshold typ. 3 AWiring of the actuators using a 20-pin front connectorDigital output module SM 322; DO 8 x DC 24 V/ 0.5 A; withdiagnostics interrupt; (6ES7322-8BF00-0AB0)Order number: "Standard module"6ES7322-8BF00-0AB0Order number: "SIPLUS module"6AG1322-8BF00-2AB0PropertiesProperties of SM 322; DO 8 x DC 24 V/0.5 A:● 8 outputs, electrically isolated in groups of 8● Output current 0.5 A● Rated load voltage 24 V DC● Suitable for solenoid valves, DC contactors and signal lamps● 2 terminals per output– Output without series diode
– Output with series diode (for redundant load control)● Group error display (SF)● Channel-specific status and error LEDs● Programmable diagnostics● Programmable diagnostic interrupt● Programmable substitute value output● Supports parameter reassignment in RUNGroup error display -red②Channel number (0 ... 7)③ Channel fault display -red- (F0 ... F7)④ Status display -green⑤Backplane businterfaceFigure 3-9 Wiring and block diagram of SM 322; DO 8 x 24 V DC / 0.5Redundant load controlTheoutput with series diode can be used for redundant load control. Redundant controlwithout externalcircuitry is possible using two different signal modules. Both modules mustbe connected to the common reference potential M.NoteIt is not possible to detect external short-circuitstoL+ at output with series diode.Dimensions W x H x D (mm) 40 x 125 x 117Weight ca. 210 gModulespecificdataSupports parameter reassignment in RUNYes•Reaction of non-programmed outputs Returnhe output value which was valid beforetheparameterization• shieldedmax. 600 mmax. 1000mVoltages,currents, electrical potentialsRated load voltage L+ 24 VDCTotal current (per group) of outputs without series diode• horizontal mounting positionto 40 °Cto 60 °Cmax. 4 Amax. 3 A• vertical mountingpositionto40 °Cmax. 4 ATotal current of outputs (per group) with series diode•horizontalmountingpositionto 40 °C