 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5146N11 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Mateiral: | Iron |
|---|---|---|---|
| Color: | Gray | Temperature: | 20-90 |
| Dimension: | 80mm | Wire: | Wire |
| TS5146N11: | TS5146N11 | Japan: | Japan |
TS5146N11
| The load current supply (galvanic isolation) Figure 6-1 Operating the With the automation system/ET 200MP distributed I/O system, there is galvanic |
|
| isolation betweenThe primary side of the system power supply (PS) and all other circuit components | |
| isolation betweenThe primary side of the system power supply (PS) and all other circuit components |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5246N158
TS5667N650
TS5213N551
TS5668N20
TS5667N120
TS5667N420
TS5246N160
TS5312N512
TS5208N122
TS5641N151
TS5270N15
TS5308N616
TS5213N510
TS2014N181E32
TS5308N616
TS3462N1E76
TS5214N561
TS5214N510
TS2014N182E32
TS3653N2E5
TS5320N510
TS5016N-60
TS5016N60
TS2651N111E78
TS2014N181E32
TS2651N131E78
TS2651N141E78
TS5214N566
TS5205N450
TS5308N616
TS3462N1E76
48-2500P8-L6-5V
TS5214N561
TS5214N510
TS2014N182E32
TS3653N2E5
TS5320N510
TS5016N-60
TS5016N60
TS2651N111E78
TS2014N181E32
TS5013N60,
TS5013N61,
TS5016N60,
TS5017N60,
TS5013N68,
TS5
013N69
TS5013N60
TS5016N60
TS5013N60
TS5016N60
TS5017N60
TS5013N68
TS5013N69
TS2014N181E32
TS2014N311E32
TS2650N11E78
TS2650N1E78
TS5081N1
TS5084N250
TS5314N255
TS5303N510
TS5622N131
TS1616N200
TS1501N13
TS5641N154
TS5205N454
TS5668N20
TS5667N120
TS5667N420
The load ciHigh-frequency interference currents are conducted and electrostatic charges are avoided
through integrated RC combinations or integrated capacitorThe following figure shows a simplified representation of the potential relationships of the
automation systemThe following figure shows a simplified representation of the potential relationships of the
ET 200MP distributed I/O syThe following figure shows a simplified representation of the potential relationships of the
ET 200MP distributed I/O sytem on PROFIBUS DPPotential relationships for ET 200MP using an IM 155-5 DP ST interface module as an exampleUse suitable cables for connecting the automation system/ET 200MP distributed
I/O system. The following tables present the wiring rules for the CPU, interface module,
system power supply, load currenterface module,
system power supply, load current supply, front connector and power supply elements
with more than five electromagnetic devicesf you want to configure the automation system/ET 200MP distributed I/O system
with grounded referYou can find a simplified representation of the potential relationships in section Electrical
configuration
At the max. ambient temperature of the /ET 200MP system, you must select
sufficiently large wire cross-sections so that the permissible cable temperatures are not
exceededExamples:
vAt an ambient temperature of 60° C, a current of, for example, 4 A per wire and a crosssection of 1.5 mm² Cu, a connecting cable must be rated for a temperature range of at
least 90° C.
• At an ambient tempeAt an ambient temperature of 60° C, a current of, for example, 2 A per wire and a crosssection of 1.5 mm² Cu, a connecting cable must be rated for a temperature range of at
least 80° C.The supply voltage of the CPU/interface module is supplied by means of a 4-pole connection
plug, which is located on the front or below on the CPU / interface moduleThe supply voltage of the CPU/interface module is supplied by means of a 4-pole connection
plug, which is located on the front or below on the CPU / interface module+ 24 V DC of the supply voltage
② Mass of the supply voltage
③ Mass of the supply voltage for looping (current limited to 10 A)
④ + 24 V DC of the supply voltage for looping (current limited to 10 A)
⑤ Spring opener (one s3 to 3.5 mm screwdriver
To connect a wire without tools, follow these steps:
1. Strip 8 to 11 mm of the wires.
2. Seal or crimp the wire with end sleeves.
