 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5013N69 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| TS5013N69: | TS5013N69 | Color: | Black |
| Temperature: | 20-90 | Japan: | Japan |
| Wire: | Wire | Dimension: | 60mm |
TS5013N69
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3630N101E2
TS3630N102E4
TS3630N22E3
TS3630N22E4
TS3631N1E1
TS3636N6
TS3641N1E1
TS3641N21E6
TS3641N22E7
TS3641N2E3
TS3641N12E3
TS3641N32
TS3641N38
TS3643N2
TS3643N212E5
TS3643N233E8
TS3653N11E2
TS3653N12E5
TS3653N13E8
TS3653N1E1
TS3653N1E2
TS3653N2E4
TS3653N2E5
TS3653N2E6
TS3653N3E7
TS3653N3E8
TS3653N3E9
TS3653N13E9
TS3653N44E8
TS3653N4E12
TS3653N14E12
TS3653N58E5
| GPRS (General Packet Radio Service) The packet-oriented service for data transmission "GPRS" is handled via the GSM network. |
850 MHz ● For communication with or via a central control room, the control center requires a PC with Internet access. |
| SMS (Short Message Service) The CP 1242-7 can receive and send SMS messages. The communications partner can be a mobile phone or an . |
Apart from the station equipment, a remote station with a CP 1242-7 must meet the following requirements to be able to communicate via the GSM network: |
| The CP 1242-7 is suitable for use in industry worldwide and supports the following frequency bands: |
A contract with a suitable GSM network provider If GPRS is used, the contract must allow the use of the GPRS service. |
If there is to be direct communication between stations only via the GSM network, the
GSM network provider must assign a fixed IP address to the CPs. In this case,
communication between stations is not via the control center.
– The SIM card belonging to the contract
The SIM card is inserted in the CP 1242-7.
– Local availability of a GSM network in the range of the stationThe CP 1242-7 can be used for the following applications:
Telecontrol applications
● Sending messages by SMS
Via the CP 1242-7, the CPU of a remote station can receive SMS messages
from the GSM network or send messages by SMS to a configured mobile phone or an
.
● Communication with a control center
Remote stations communicate via the GSM network and the Internet with a
telecontrol server in the master station. For data transfer using GPRS, the
"TELECONTROL SERVER BASIC" application is installed on the telecontrol server in the
master station. The telecontrol server communicates with a higher-level central control
system using the integrated OPC server function.
● Communication between stations via a GSM network
Communication between remote stations with a CP 1242-7 can be handled in two
different ways:
– Inter-station communication via a master station
In this configuration, a permanent secure connection between stations that
communicate with each other and the telecontrol server is established in the master
station. Communication between the stations is via the telecontrol server. The
CP 1242-7 operates in "Telecontrol" mode.
– Direct communication between the stations
For direct communication between stations without the detour via the master station,
SIM cards with a fixed IP address are used that allow the stations to address each
other directly. The possible communications services and security functions (for
example VPN) depend on what is offered by the network provider. The CP 1242-7
operates in "GPRS direct" mode. A TeleService connection can be established between an engineering station with STEP 7
and a remote station with a CP 1242-7 via the GSM network and the Internet. The
connection runs from the engineering station via a telecontrol server or a TeleService
gateway that acts as an intermediary forwarding frames and establishing the authorization.
These PCs use the functions of the "TELECONTROL SERVER BASIC" application.
You can use the TeleService connection for the following purposes:
● Downloading configuration or program data from the STEP 7 project to the station
● Querying diagnostics data on the station Time-of-day synchronization of the CP via the Internet
You can set the time on the CP as follows:
