 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS2014N18E32 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | Temperature: | 40-80 |
| Wire: | Wire | Japan: | Japan |
| Dimension: | 50mm | TS2014N18E32: | TS2014N18E32 |
TS2014N18E32
| (0 to 65535 bit times up to 8 second maximum) Sequence 1 ignore/compare control for each character: | character 5 is bit 4. Disabling the bit associated with a |
| These are the enabling bits for each character for the end | character means any character will match, in this sequence position. |
| sequence. Character 1 is bit 0, character 2 is bit 1, …, | ENDSEQ1 IN Char[5] 0 |
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5667N120
TS5667N420
TS5308N616
TS3462N1E76
TS5214N561
TS5214N510
TS2014N182E32
TS3653N2E5
TS5320N510
TS5016N60
TS5016N60
TS2651N111E78
TS2014N181E32
TS5208N130
TS5214N566
TS5205N450
TS5205N454
TS2651N11E78
TS2651N141E78
TS2651N1E78
TS2651N131E78
TS3103N40
TS3653N2E5
TS3653N3E8
TS3684N1E3
TS3684N2E6
TS3684N3E8
TS3667N3E8
TS3624N2E3
TS3624N2E4
TS3624N3E6
TS3630N1E1
TS3630N2E3
TS3630N1306
TS3630N1303E9
TS3630N1214E3
TS5013N60
TS5013N61
TS5016N60
TS5013N63
TS5013N64
TS5016N61
Sequence 1 start characters (5 characters)llegal start condition selected
80C1 Illegal end condition selected, no end condition selected
80C2 Receive interrupt enabled and this is not possible.
80C3 Maximum length end condition is enabled and max length is 0 or > 1024.
80C4 Calculated length is enabled and N is >= 1023.
80C5 Calculated length is enabled and length is not 1, 2 or 4.
80C6 Calculated length is enabled and M value is > 255.
80C7 Calculated length is enabled and calculated length is > 1024.
80C8 Response timeout is enabled and response timeout is zero.
80C9 Inter-character gap timeout is enabled and it is zero.
80CA Idle line timeout is enabled and it is zero.
80CB End sequence is enabled but all chars are "don't care".
80CC Start sequence (any one of 4) is enabled but all characters are "don't care". SEND_PTP initiates the transmission of the data
and transfers the assigned buffer to the
communication interface. The CPU program
continues while the CM or CB sends the data at the
assigned baud rate. Only one send operation can
be pending at a given time. The CM or CB returns
an error if a second SEND_PTP is executed while
the CM or CB is already transmitting a message. Activates the requested transmission on the rising edge of this transmission
enable input. This initiates transfer of the contents of the buffer to the Point-toPoint
communication interface. (Default value: False)
PORT IN PORT After you install and configure a CM or CB communication device, the port
identifier appears in the parameter helper drop-list available at the PORT box
connection. The assigned CM or CB port value is the device configuration
property "hardware identifier". The port symbolic name is assigned in the
"System constants" tab of the PLC tag table. (Default value: 0)
BUFFER IN Variant This parameter points to the starting location of the transmit buffer. (Default
value: 0)
Note: Boolean data or Boolean arrays are not supported.
LENGTH IN UInt Transmitted frame length in bytes (Default value: 0)
When transmitting a complex structure, always use a length of 0.
PTRCL IN Bool This parameter selects the buffer as normal point-to-point or specific provided
protocols that are implemented within the attached CM or CB.
(Default value: False)
FALSE = user program controlled point-to-point operations. (only valid option)
DONE OUT Bool TRUE for one scan, after the last request was completed with no error
ERROR OUT Bool TRUE for one scan, after the last request was completed with an error
STATUS OUT Word Execution condition code (Default value: 0) While a transmit operation is in progress, the DONE and ERROR outputs are FALSE. When
a transmit operation is complete, either the DONE or the ERROR output will be set TRUE to
show the status of the transmit operation. While DONE or ERROR is TRUE, the STATUS
output is valid.
The instruction returns a status of 16#7001 if the communication interface accepts the
transmit data. Subsequent SEND_PTP executions return 16#7002, if the CM or CB is still
busy transmitting. When the transmit operation is complete, the CM or CB returns the status
of the transmit operation as 16#0000 (if no errors occurred). Subsequent executions of
SEND_PTP with REQ low return a status of 16#7000 (not busy).
The following diagrams show the relationship of the output values to REQ. This assumes
that the instruction is called periodically to check for the status of the transmission process.
