 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5016N60 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5016N60: | TS5016N60 |
|---|---|---|---|
| Material: | Iron | Color: | Gray |
| Temperature: | 30-120 | Dimension: | 50mm |
| Wire: | Wire | Japan: | Japan |
TS5016N60
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3624N3E5
TS3624N3E6
TS3630N1303E9
TS3630N1309E5
TS3630N1306
TS3630N1E1
TS3630N1E2
TS3630N2E3
TS3630N2E4
TS3630N3E5
TS3630N101E2
TS3630N102E4
TS3630N22E3
TS3630N22E4
TS3631N1E1
TS3636N6
TS3641N1E1
TS3641N21E6
TS3641N22E7
TS3641N2E3
TS3641N12E3
TS3641N32
TS3641N38
TS3643N2
TS3643N212E5
TS3643N233E8
TS3653N11E2
TS3653N12E5
TS3653N13E8
| Programmable resolution for each channel group | Programmable limit value monitoring for 8 channels |
| Any measuring range selection per channel group | Programmable hardware interrupt when limit is exceeded |
| Programmable diagnostics and diagnostic interrupt |
Programmable hardware interrupt at end of cycle
● High-speed update of measured values at up to 4 channels
● Electrical isolation to the CPU
● Supports parameter reassignment in RUN
Diagnostics
For information on diagnostic messages at the "group diagnostics" parameter, refer to the
table Diagnostic messages of analog input modules.
Terminal assignment
The diagrams below show various wiring optionsSupports parameter reassignment in RUN Yes
Response of non-programmed inputs Return the process value which was valid before
configuration
Supports isochronous mode no
Number of inputs 8
Cable length
• shielded max. 200 mRated electronics supply voltage L + 24 V DC
• Reverse polarity protection yesElectrical isolation• between channels and the backplane bus• between channels and electronics power supply• between channels
in groups ofyesyes
yes2
Isolation test voltage 500 V AC
Current consumption• from the backplane bus• from supply voltage L+
max. 100 mAmax. 200 mAPower loss of the module typ. 3.0 WGeneration of analog values
Measuring principle IntegratingIntegration/conversion time/resolution (per channel)• programmable
• Basic conversion time in ms (8-channel mode)• Basic conversion time in ms (4-channel mode)• Resolution, including sign• Interference frequency suppression at frequency f1 in Hzyes
95/83/72/23
101) 4)16 bits
All2)/50/60/400
Measured value smoothing None / low/ average/ highBasic execution time of the module, in ms (8-channel-mode) 190/166/144//46
Basic execution time of the module, in ms (4-channel-mode) 101)
nterference frequency suppression, error limitInterference frequency suppression at F = n x (f1 1%)(f1 = interference frequency, n = 1, 2, ...) Common mode interference (VCM < AC 60 V) Series mode interference (peak value of disturbance < ratednput range)
> 100 dB> 90 dB 3)Crosstalk between inputs > 100 dBOperational limit (across entire temperature range, relative to the measurement range end value in theselected input
range)• Input voltage• Input current±0.1%±0.1%Basic error limit (operational limit at 25 °C, relative to themeasurement range end value in the selected input range)
