TAMAGAWA TS5007N635 TS5007N635 TS5007N635 TS5007N635 TS5007N635 TS5007N635

TS5007N635

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3653N3E8

TS5850N64

TS3630N1309E5

TS5010N

TS2650N11E78

TS3762N15E4

TS1981N56E19

TS3653N3E9

TS5850N70

TS3630N1306

TS5013N69

TS2650N101E78

TS4126N1017E235

TS1981N56E19

TS3653N13E9

TS5N2E18

TS3630N1E1

TS5013N61

TS2651N111E78

TS4127N1017E215

TS1982N126E6

TS3653N44E8

TS3630N1E2

TS5013N89

TS2651N181E78

TS4127N1017E235

from the backplane bus• from power supply L+max. 100 mA
max. 250 mAPower loss of the module typ. 4.5 Status, interrupts, diagnostics
Status display green LED per channelInterrupts noneDiagnostic functions noneThermal current, continuous max. 2 AMinimum load voltage / current 10 V / 10 mA
Short-circuit current to IEC 947-5-1 200 A, with B10/B16 circuit breakerSwitching capacity and service lifeof contacts
• with resistive loadVoltage Current No. of switching cycles (typical)24 V DC

for redundant load control supported (only outputs of the same group)
• for performance increase not supported
Control of a digital input supported
Switching frequency
• Mechanical max. 10 Hz
• with resistive load max. 1 Hz
• with inductive load to IEC 947-5-1, DC13/AC15 max. 0.5 Hz
• with lamp load max. 1 Hz
Wiring of the actuators using a 20-pin front connector
6ES7322-1HF01-0AA0
Properties
The SM 322; DO 8 x Rel. 230 V AC is characterized by the following properties:
● 8 outputs, electrically isolated in groups of 2
● Rated load voltage 24 to 120 V DC, 48 V to 230 V AC
● Suitable for AC/DC solenoid valves, contactors, motor starters, FHP motors and signal
lamps.
The following only applies to SM 322; DO 8 x Rel. 230 V AC with product version 1: The
internal backup capacitor provides power for the duration of ca. 200 ms. This backup time is
sufficient to briefly control the relay in the user program.
Rated power supply L+ to the relays 24 V DC
Total current of outputs (per group) max. 4 A
Electrical isolation
• between channels and the backplane bus yes
• between channels
in groups of
yes
2
Maximum potential difference
• Between Minternal and the power supply to relays and outputs 230 V AC
• Between outputs of different groups 500 V AC
Isolation test voltage
• between Minternal and the power supply to relays 500 V DC
• between Minternal and the power supply to relays and outputs 2000 V AC
• between outputs of different groups 2000 V ACCurrent consumption
• from the backplane bus• from power supply L+
max. 40 mAmax. 160 mAPower loss of the module typ. 3.2 WStatus, interrupts, diagnosticsStatus display green LED per channelInterrupts noneDiagnostic functions none
Actuator selection dataThermal current, continuous max. 3 AMinimum load voltage / current 10 V / 5 mAShort circuit-proof to IEC 947-5-1 2) With circuit-breaker, characteristics B, for:
cos Φ 1.0: 600 Acos Φ 0.5...0.7: 900 AWith 8 A Diazed fuse: 1000 AFluorescent lamps, conventionally compensated 2) 1 x 58 W 25000Fluorescent lamps, non-compensated 2) 10 x 58 W 25000Wiring two outputs in parallel• for redundant load control supported (only outputs of the same group)
• for performance increase not supportedControl of a digital input supportedSwitching frequency
• Mechanical max. 10 Hz• with resistive load max. 2 Hz• with inductive load to IEC 947-5-1, DC13/AC15 max. 0.5 Hz• with lamp load max. 2 HzWiring of the actuators using a 20-pin front connector1) Product version 12) Product version 2 or higher