 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5210N530 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| Tamagawa: | Tamagawa | TS5210N530: | TS5210N530 |
|---|---|---|---|
| Japan: | Japan | COLOR: | BLACK |
| Temperature: | 50-120 | Material: | Iron |
TS5210N530
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3684N11E3
TS3617N2E4
TS3624N21E2
TS1508N260
TS3033N4E2
TS4507N6205E200
TS3214N16
TA8110N2121E916
TS3684N12E6
TS3630N11E1
TS3624N1E2
TS1613N200
TS3063N15E8
TS4507N8029E200
TS3214N44
TS1446N4
TS3684N13E8
TS3664N2E4
TS3624N102E4
TS16N13E12
TS3103N5037
TS4509N1002E200
TS3218
TS1508N202
TS3684N1E3
TS3653N13E7
TS3624N103E5
TS16N18E11
TS3501N
TS4509N1202E200
TS3218N42
TS1508N77
TS3684N2E6
TS3653N12E6
| This chapter describes: | Modules which are available (properties, connection and block diagrams, technical data |
| Analog module selection and commissioning sequence | and additional information on the module) |
| Overview of essential module properties | for analog input modules |
for analog output modules
c) for analog IO modulesSTEP 7 blocks for analog functionsYou can use FC105 "SCALE" (scale values)and FC106 "UNSCALE" (unscale values)blocks to read and output analog values in STEP 7. Those FCs are available in the STEP 7standard library, in the "TI-S7-Converting Blocks" subfolder.
Description of STEP 7 blocks for analog functions
For information on FCs 105 and 106, refer to the STEP 7 Online Help.Further information
You should be familiar with the structure of the parameter sets (data records 0, 1 and 128) insystem data before you edit module parameters in the STEP 7 user program.
You should be familiar with the structure of diagnostics data (data records 0, 1) in systemdata before you edit any diagnostics data of the module in the STEP 7 user program.
See also
Principles of programming signal modules in the user program (Page 522)Evaluating diagnostic data of signal modules in the user program
The table below contains the steps required to successfully complete commissioning ofanalog modules.
You do not strictly have to adhere to this suggested sequence, that is, you can complete
other tasks such as installing or commissioning other modules, or program the module at an
earlier or later time
Selecting the module
2. For certain analog input modules: Set the measuring type and range using the measuring
range module
3. Installing the module in the SIMATIC S7 system
4. Assigning module parameters
5. Connect the measuring transducers or loads to the module
6. Commission the configuration
7. Analyze the configuration if commissioning failed
More information on installation and commissioning
See the "Installation" and "Commissioning" chapter in the Installation Manual for your
automation system:
● S7-300 Automation System, Installation or
● S7-400 Automation System, Installation or
● Distributed I/O Device ET 200M
The documentation is available on the Internet
The tables below summarize the essential properties of the analog modules. This overview
supports you in selecting a module to suit your requirements.
6.2.1 Analog input modules
Overview of properties
The table below shows essential properties of the analog input modules
Limit value monitoring
programmable for
2 channels
programmable for
8 channelsprogrammable for2 channelsno programmable for
2 channelHardware interrupt
when limit exceededprogrammable programmable programmable no Programmable
Hardware interruptat end of cycle
no yes no No noPotential ratios electrically isolatedfrom:• The backplane
bus interfaceelectrically isolatedfrom:• The backplanebus interfaceelectrically isolated
from:• The backplanebus interface• The load voltage(not for 2-DMU)
