TAMAGAWA TS5210N553 TS5210N553 TS5210N553 TS5210N553 TS5210N553 TS5210N553

TS5210N553

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3275N125

TS1562N102

TS3692N41

TS3653N13E9

TS2014N18E32

TS2014N312E32

TS3617N3E10

TS4509N7000E100

TS3153N15E18

TS1567N132

TS3692N42

TS3653N2E6

TS2014N43E31

TS2018N303E51

TS3617N3E8

TS4514N1021E200

TS3602N213E8

TS3699N112

TS3653N3E7

TS2058N21E1-A

TS20E12

TS3617N13E8

TS4514N1407E200

TS3602N233E8

TS1857N16

TS4603N1532E200

TS2058N21EAA

TS20N2E11

TS3617N376

TS4514N1828E200

TS3602N31E8

TS-1905N146E6

TS4603N1700E200

To operate a terminal on SELV, the horizontally adjacent terminal may not be operated at a

to 30 °Cto 60 °C• vertical mounting positionto 40 °Cmax. 8 Amax. 5 Amax. 5 AElectrical isolation• betweenchannels and the backplane bus yes• between channelsingroupsofyes1Maximum potential difference• Between Minternal and the power supply to relays and outputs 250 V AC• Between outputs of different groups 500 V ACIsolation test voltage• between Minternal and the power supply to relays 500 V DC• between Minternal andthe power supply to relays and outputs 1500 V AC• between outputs of different groups 2000 V AC
Current consumption
• from the backplane bus• from power supply L+max. 40 mAmax. 125 mAPower loss of the module typ. 3.2 WStatus, interrupts, diagnosticsStatus displayInterruptDiagnostic functionsThermal current, continuous max. 8 AMinimum load voltage / current 10 V / 5mAhort-circuit current to IEC 947-5-1 With circuit-breaker, characteristics B, for:cos Φ 1.0: 600 Acos Φ0.5...0.7: 900 AWith 8 A Diazed fuse: 1000 ASwitching capacity and useful life of contacts• with resistiveloadAux.contactors Size 0 (3TH28) 30 millionAn external protective circuit extends the useful life of contacts.Power No. of switching cycles (typical)Lamp load (230 V AC) 1000 W1500 W2500010000Energy-saving lamps/fluorescent lamps with electronic ballast 10 x 58 W 25000
Fluorescent lamps, conventionally compensated 1 x 58 W 25000
Fluorescent lamps, non-compensated 10 x 58 W 25000Contact protection (internal) noneWiring two outputs in parallel
• For redundant load control supported• for performance increase not supportedControl of a digital input supportedSwitching frequency• Mechanical max. 10 Hz
• with resistive load max. 2 Hz• with inductive load to IEC 947-5-1, DC13/AC15 max. 0.5 Hz
• with lamp load max. 2 HzWiring of the actuators using a 40-pin front connector
6ES7323-1BL00-0AA0Properties
Properties of SM 323; DI 16/DO 16 x DC 24 V/0.5 A:● 16 inputs, electrically isolated in groups of 16● 16 outputs, electrically isolated in groups of 8● Rated input voltage 24 V DC● Rated load voltage 24 V DC●Inputs suitable for switches and 2-/3-/4-wire proximity switches (BEROs)● Outputs capable of driving solenoid valves, DC contactors and indicator lightsUse of the module with high-speed countersPleasenote when using the module in combination with high-speed counters:NoteWhen using a mechanical contact to switch on the 24-V power supply to SM 323; DI 16/DO16 x DC 24 V/0.5 A, its outputs will carry "1" signal for the duration of ca. 50 µs, due to thecircuit structureChannel number② Status displays - green③ Backplane bus interfaceDimensions W x H x D (mm) 40 x 125 x 117
ca. 260 gModule-specific data
Isochronous no
Number of inputs 16Number of outputs 16Cable length
• unshielded• shieldedmax. 600 m
max. 1000 mVoltages, currents, electrical potentialsRated load voltage L+ 24 V DCNumber of simultaneously controlled inputs
• horizontal mounting positionto 40 °Cto 60 °C
168• vertical mounting position
to 40 °C16
Total current of outputs (per group)• horizontal mounting position
to 40 °Cto 60 °C
max. 4 Amax. 3 A• vertical mounting positionto 40 °Cmax. 2 A