TAMAGAWA TS5308N616 TS5308N616 TS5308N616 TS5308N616 TS5308N616 TS5308N616

TS5308N616

Guang Zhou Lai Jie Electric Co.,LTD

Please contact with “Tommy” for the price

TS3667N12E6

TS3667N31E7

TS3667N13E8

TS3624N1E1

TS3624N1E2

TS3624N2E3

TS3624N2E4

TS3624N3E5

TS3624N3E6

TS3630N1E1

TS3630N1E2

TS3630N2E3

TS3630N2E4

TS3630N3E5

TS3630N3E6

TS3630N1303E9

TS3630N1306

TS3630N11E1

TS3630N11E2

TS3630N12E3

TS3630N12E4

TS3630N13E5

TS3630N13E6

FA-CODER

TS5214N566

TS5205N450

TS5205N454

TS5205

N450

TS5205

N454

TS5205N452

TS5205

N452

TS5207

TS5208

TS5212

TS5213

TS5214

TS5231

TS5217

TS5233

TS5150

TS5300

TS5100

TS5000

TS5080

TS5170

TS5410

TS5200N500

TS5146

TS5270

TS5610

TS5620

TS1857

TS5607

TS5668N20

TS5667N120

TS5667N420

TS5645

TS5647

TS5648

TS5643

TS2223

TS2224

TS2225

TS20E12

TS13E11

TS5308N616

TS2650N11E78

TS5420N60

TS5208N131

TS3462N1E76

48-2500P8-L6-5VC/T-L3-12V

TS-5016N-60

TS5214N561

TS5214N510

TS2014N182E32

TS3653N2E5

TS5320N510

TS5016N-60

KTY83 series (KTY83/110)
● KTY84 series (KTY84/130)
Also take note of the accuracy of the temperature sensors.
The temperature is specified in 0.1 degrees C, 0.1 degrees K, and/or 0.1 degrees F, see
section Representation of the values for analog input channels (Page 262).
6ES7331-7KF02-0AB0
Properties
● 8 inputs in 4 channel groups
● Programmable measurement type at each channel group
– Voltage
– Current
– Resistance
– Temperature
● Programmable resolution at each channel group (9/12/14 bits + sign)
● Any measuring range selection per channel group
● Programmable diagnostics and diagnostic interrupt
● Programmable limit value monitoring for 2 channels
● Programmable hardware interrupt when limit is exceeded
● Electrically isolated to CPU and load voltage (not for 2-wire transducers)
Resolution
The resolution of measured values is directly dependent of the selected integration time. In
other words, the longer the integration time for an analog input channel, the higher the
resolution of a measured value.
Diagnostics
For information on diagnostics messages at the "group diagnostics" parameter, refer to
chapter Diagnostic messages of analog input modules.
Hardware interrupts
Hardware interrupts for channel groups 0 and 1 can be programmed in STEP 7. However,
set a hardware interrupt only for the first channel of a channel group, that is, either at
channel 0, or at channel 2
The diagrams below show various wiring options The input impedance depends on the
setting of the measuring range module, see table Measurement types and ranges.
• "Resistance measurement" is only available at one channel per group. The "2nd" channel
of the group is used accordingly for current measuring mode (IC). The "1st" channel of the
group returns the measured value. The "2nd" channel of the group is assigned the default
overflow value "7FFFH."
• There is no compensation of the line resistance with a 2 and 3-wire connection.
An interconnection of M- and MANA is prohibited when using grounded thermocouples. In
this case, you must ensure that low-resistance equipotential bonding is in place so that
the permitted common-mode voltage is not exceeded.
• Interconnect M- and MANA when using non-grounded thermocouples
Crosstalk between inputs > 50 dB
Operational limit (across entire temperature range, relative to the measurement range end value in the selected input
range)
• Voltage input 80 mV
250 mV to 1,000 mV
2.5 V to 10 V
± 1 %
± 0.6 %
± 0.8 %
• Current input 3.2 mA to 20 mA ± 0.7 %
• Resistance 150 Ω; 300Ω; 600 Ω ± 0. 7 %
• Thermocouple Types E, N, J, K, L ± 1. 1 %
• Resistance thermometer Pt 100/Ni 100 ± 0. 7 %
Pt 100 Klima ± 0. 8 %
Basic error limit (operational limit at 25 °C, relative to the measurement range end value in the selected input range)
• Voltage input 80 mV
250 mV to 1,000 mV
2.5 V to 10 V
± 0.7 %
± 0.4 %
± 0.6 %

Current input 3.2 mA to 20 mA ± 0.5 %
• Resistance 150 Ω; 300 Ω; 600 Ω ± 0.5 %
• Thermocouple Types E, N, J, K, L ± 0.7 %
• Resistance thermometer Pt 100/Ni 100 ± 0.5 %
Pt 100 Klima ± 0.6 %
Temperature error (relative to input range) ± 0.005%/K
Linearity error (relative to input range) ± 0.05 %
Repeat accuracy (in settled state at 25 °C, relative to input
range)
± 0.05 %
Temperature error of internal compensation ± 1 %
Maximum current at current input (destruction limit) 40 mA
Wiring of the signal transmitters using a 20-pin front connector
• for voltage measurement supported
• for current measurement
as 2-wire transducer
as 4-wire transducer
supported
supported
• For thermoresistor/resistance measurement
with 2-wire connection Supported, cable resistances are not compensated
with 3-wire connection Supported, cable resistances are not compensated
with 4-wire connection Supported, cable resistances are compensated
• Load of the 2-wire transducer max. 820 Ω
Characteristics linearization
• for thermocouples
programmable
Types E, N, J, K, L
• for resistance thermometers Pt 100 (Standard and Klima range)
Ni 100 (Standard and Klima range)
Temperature compensation
• Internal temperature compensation
programmable
supported
• External temperature compensation with compensating
box
supported
• Compensation for 0 °C reference junction temperature supported
• Technical unit of temperature measurement degrees Centigrade
Module SM 331; AI 8 x 12 Bit has measuring range modules
The measurement type and range is configured at the "measuring range" parameter in
STEP 7.
The default setting of the module is "voltage" measurement with "± 10V" range. You can use