 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5667N420 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5667N420: | TS5667N420 |
|---|---|---|---|
| Japan: | Japan | Color: | Gray |
| Material: | Iron | Temperature: | 30-120 |
| Dimension: | 60mm |
TS5667N420
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3738N1E7
TS1980N56E12
60798024
TS3653N2E6
TS5787N10
TS3624N3E6
TS-5008-N-65
TS2641N31E64
TS3741N3E8
TS1981N134E9
610568-1A
TS3653N3E7
TS5850N60
TS3630N1303E9
TS5008N66
TS2650N1E78
TS374
TS1981N53E19
61347
TS3653N3E8
TS5850N64
TS3630N1309E5
TS5010N
TS2650N11E78
TS3762N15E4
TS1981N56E19
TS3653N3E9
TS5850N70
TS3630N1306
TS5013N69
TS2650N101E78
TS4126N1017E235
TS1981N56E19
TS3653N13E9
TS5N2E18
TS3630N1E1
TS5013N61
TS2651N111E78
TS4127N1017E215
TS1982N126E6
TS3653N44E8
TS3630N1E2
TS5013N89
TS2651N181E78
TS4127N1017E235
TS1982N128E6
8001231S
TS3653N4E12
TS5013N64
TS3630N2E3
TS5016N
TS5000N532
TS4231N6E17
TS1982N53E6
800123-2R
TS3653N14E12
TS5420N60
TS3630N2E4
TS5016N60
TS5000N632
TS4231N6E17
TS1982N56E18
TS3653N58E5
TS5778N155
TS3630N3E5
TS5003N632
TS4244N10E24
TS1982N56E18
800123-R-F
TS3653N65E27
TS5208N23
TS3630N101E2
TS5017N56
TS5005N122?
TS4244N3E24
TS1983N146E5
TS3653N81E27
TS2025N471E69
TS3630N102E4
TS5017N60
TS5007N122
TS4502N1000E200
TS1983N146E5
TS3653N78E5
TS2014N181E32
| Common mode interference | |
| Series-mode interference (peak value of the interference | Crosstalk between inputs |
| value of the input | perational limit (within the entire temperature range, relative to the measuring range end value of the selected input |
The resistance test for compensation of the line resistances with a 3-wire connection is performed every 5 minutes.
** Wire break monitoring in 4-channel mode (hardware filter) is performed every 3 seconds.
*** The maximum line resistance with 3-wire encoder measurements for the RTD elements PT 10 and Cu 10 is 10 Ω. For
all other RTD elements, the maximum power resistance for 3-wire encoder measurements is 20 Ω.
**** In 4-channel mode, the converted value settles to 100% within 80 ms. The value determined in this process is
switched typically every 3.3 ms (max. 10 ms).
Special considerations must be given if you use the Configuration in RUN function.
SF LED is lit:
Status before re-configuration diagnostics on, SF LEDs lit among others (on CPU, IM or
module), although diagnostics are no longer pending and the module is operating correctly.
Solution:
● Only change the configuration when no diagnostics are pending for the module or
● Pulling and plugging the module.
The measurement type and range is configured at the "measurement type" parameter in
STEP 7.
Table 6- 23 Measurement types and ranges
The channels of SM 331; AI 8 x RTD are arranged in four groups of two channels. You can
assign parameters only to one channel group.
The table below shows the relevant configuration of channel groups. The channel groupnumber is required to program SFC parameters in the user program.
able 6- 24 Assignment of SM 331; AI 8 x RTD channels to channel groupsFor general information on programming analog modules, refer to the chapter Programminganalog modules (Page 294).The table below provides an overview of programmable parameters and of their defaults:Enable
• Diagnostics interrupt• Process interrupt when limitexceeded• Process interrupt at end of
cycleyes/noyes/noyes/no
nononodynamic ModuleProcess interrupt trigger
• High limit• Low limit32511 to -32512
from - 32512 to 3251132767-32768
dynamic ChannelDiagnostics• Group diagnostics
• with line continuity checkyes/no
yes/noOperating modes of SM 331; AI 8 x RTD:
● 8-channel mode (hardware filter)
● 8-channel mode (software filter)
● 4-channel mode (hardware filter)
The operating mode influences the module cycle time.
8-channel mode (hardware filter)
