 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5000N632 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | TS5000N632: | TS5000N632 |
|---|---|---|---|
| Material: | Iron | Color: | Black |
| Temperature: | 40-120 | Dimension: | 50mm |
| Wire: | Wire |
TS5000N632
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5205N456
TS5205N450
TS5205N454
TS1981N56E19
TS1981N56E18
TS2651N111E78
TS2651N181E78
TS2640N321E64
TS5214N566/N8566
TS5208N8566
TS5667N120
TS5667N420
TS2651N181E78
TS2651N141E78
TS6026N151
TA8481N0300
TA8480N0100
TA8480N0200
TS5000N632
TS2014N181E32
TS2651N131E78
TS5667N420
TS5303N510
TS5246N574
TS5208N143
TS4603N1680E200
TS4603N1680E200
TA8480N0000
TS5216N579AU6802N1
TS5213N510TAMAGAWA
TS3624N22E3
TS5238N352
OIH48-2000P8-L6-5V
TS5212N530
TS5214N8566
TS5214N8566
TS5246N160
TS2620N21E11
TS2650N11E78
TS4602N1033E200
TS5668N41
TS5314N510-2500C/T
35-2000P4-L6-5V
TS5668N43
48-5000p8-L6-5V
TS5217N577
TS3641N
4509N1021E100
OIH48-2500P8-L6-5V60
TS2651N141E78
TS3653N2E5
TS5246N160
TS5246N473
OIH60-8192P24-L6-5V
TS2651N141E78
TS5667N120
TS5667N420
TS5308N616
TS3462N1E76
TS2651N1E78
TS2651N131E78
TS2014N181E32
TS3103N40
TS3653N2E5
TS3653N3E8
TS3684N1E3
TS3684N2E6
TS3684N3E8
TS3667N3E8
TS3624N2E3
TS3624N2E4
TS3624N3E6
TS3630N1E1
TS3630N2E3
TS3630N1306
TS3630N1303E9
TS3630N1214E3
| Integration times set lower than this | |
| will result in a higher repeat-accuracy error for the temperature measurements. | |
| With thermocouple type B, a missing compensation of the reference junction |
temperature has no significant effect owing
to its slight increase from approx. 0 °C to 40 °C. With missing compensation and set measuring type "Compensation
to 0 °C", the deviation with thermocouple type B at measuring temperatures between:
– 700 °C and 1820 °C is < 0.5 °C
– 500 °C and 700 °C is < 0.7 °C.
If the reference junction temperature is approximately that of the module temperature, "internal compensation" should
be set. As a result, the error for the temperature range from 500 °C to 1820 °C is reduced to < 0.5 °C.
sstalk between inputs > 130 dB(3)
OperatFor general information on programming analog modules, refer to the section titled
Programming analog modules (Page 294).ional limit (across entire temperature range, relative to measurement range end value in the selected input range, 0-
60 °C)easurement
• Measurement type disabled
TC-IL thermocouple
(linear, internal comparison)
TC-EL thermocouple
(linear, external comparison)
TC-L00C thermocouple
(linear, 0 °C reference temperature)
TC-L50C thermocouple
(linear, 50 °C reference temperature)
TC-IL:
Dynamic Channel
• Measuring range See chapter Measurement types and
measuring ranges (Page 423)
Type K
• Response to open thermocouple
Overflow; underflow
The following hardware and software requirements must be met to use the SM 331; AI 6 x
TC isolated analog input module:
● If the module is to be used centrally in , all CPUs must have firmware version 2.6
or higher (with the exception of 6ES7318-2AJ00-0AB0).
● If the module is to be used on a distributed basis in ET 200M, the following IM 153
modules are suitable:
6ES7153-1AA03-0XB0, product version 12 or higher
6ES7153-2BA02-0XB0
6ES7153-2BA82-0XB0
6ES7153-4BA00-0XB0
6ES7153-4AA01-0XB0
● A GSD file must be used if the module is part of a distributed installation and controlled by
a master produced by a third-party manufacturer with DPV1 support (operation with
DPV0 is not supported). The GSD file for the selected IM 153 is available for download
For user calibration:
SIMATIC PDM V6.0 + SP3 + HF2 (HSP0158) or PDM V6.0 + SP4 or higher
and EDD for ET 200M "DP_IOSystem__ET200M_Module.Device" V1.1.10 or
higher.
Unused channels
Set the "disabled" value at the "measurement type" parameter for unused channels. Unused
channels should also be short-circuited at the connection plug.
Effect of this measure:● You prevent measurement errors at the unused channels.● You suppressdiagnostic messages from the unused channels.Analog modules6.11 Analog input module SM 331, AI 6 x TC isolated (6ES7331-7PE10-0AB0)
Module data
426 Manual, 06/2017, A5E00105505-AJShort-circuit to M or LThe module does not suffer any damage if you short-circuit an input channel to M or L. Thechannel continues to output valid data and does not report a diagnostics event.Special features of channel groups with respect to hardware interrupts when limit is exceeded
You can set the high and low limits triggering hardware interrupts separately for eachchannel in STEP 7.
Hardware interruptThe table below shows the contents of the 4 bytes of additional OB40 information during a
hardware interrupt
