 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS2014N181E32 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | CARTON |
| Delivery Time: | IN STOCK |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100PCS/WEEK |
| Tamagawa: | Tamagawa | TS2014N181E32: | TS2014N181E32 |
|---|---|---|---|
| Japan: | Japan | COLOR: | BLACK |
| Material: | Iron | Temperature: | 40-120 |
TS2014N181E32
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS3684N2E6
TS3684N3E8
TS3667N3E8
TS3624N2E3
TS3624N2E4
TS3624N3E6
TS3630N1E1
TS3630N2E3
TS3630N1306
TS3630N1303E9
TS3630N1214E3
TS5013N60
TS5013N61
TS5016N60
TS5013N63
TS5013N64
TS5016N61
TS5013N66
TS5016N63
TS5016N64
TS5017N60
TS5019N60
TS5420N60
TS5778N155
TS5013N68
TS5013N69
TS5208N131
TS5208N23
TS2025N471E69TS2025N471E691E32
TS5208N111E78
TS5208N141E78
TS5631N224
PULSE
GENERATOR
RP-182
750PPR
PULSE
GENERATOR
RP-182
1500PPR
PULSE
GENERATORRP-482E,750PPR
ROTALY
ENCODER
RP-112A-T1,750PPR
ROTALY
ENCODER
RP-112A-T1,1500PPR
ROTALY
ENCODER
RP-112A-T1,3000PPR
ROTALY
ENCODER
RP-132,1500PPR
ROTALY
ENCODER
RP-446Z,750PPR
ROTALY
ENCODER
M-52004
RP872ZL
2048PPR
ROTALY
ENCODER
RP-132A-T1,750PPR
ROTALY
ENCODER
RP-873ZL,2048PPR
ROTALY
ENCODER
RP-886ZN,2500PPR
ROTALY
ENCODER
RP-5354D-CD-4096PPR
ROTALY
ENCODER
| If internal or external reference junction compensation is configured, the measured values of all channels are not | |
| updated for about 1 s in each minute | |
| If you reassign parameters in RUN, the following special characteristic applies. SF LED is lit: |
If a diagnostics was pending prior to reconfiguration, the SF LEDs (on CPU, IM or module)
may be lit even though diagnostics is no longer pending and the module is operating
correctly.
Solution:
● Only assign new parameters if no diagnostics is pending, or
● unplug module and plug it in again.
6.10.1 Measurement types and measuring ranges
Introduction
The measurement type and range are configured at the "measuring range" parameter in
STEP 7.
Table 6- 27 Measurement types and ranges
The channels of SM 331; AI 8 x TC are arranged in four groups of two channels. You can
assign parameters only to one channel group.
The table below shows the relevant configuration of channel groups. The channel group
number is required to program SFC parameters in the user program.
Table 6- 28 Assignment of SM 331; AI 8 x TC channels to channel group
Operating modes of SM 331; AI 8 x TC:
● 8-channel mode (hardware filter)
● 8-channel mode (software filter)
● 4-channel mode (hardware filter)
The operating mode influences the module cycle time.
8-channel mode (hardware filter)
In this mode, the module changes between the two channels of each group. The four ADCs
of the module simultaneously convert channels 0, 2, 4 and 6. The ADCs first convert the
channels with even numbers, and then the channels with the odd numbers 1, 3, 5 and 7 (see
the figure below.)
The channel conversion time, including module communication time, is 91 ms. The module
must change to the second channel of the group using OptoMOS relays when conversion is
completed. Opto-MOS relays require 7 ms for switching and settling. Each channel requires
a time of 98 ms, i.e. the total cycle time equals 196 ms.
Cycle time = (tK + tU) x 2
Cycle time = (91 ms + 7 ms) x 2
Cycle time = 196 ms
tC: Conversion time for one channel
tC: Time for changing over to the other channel in a channel group
8-channel mode (software filter)
Analog-to-digital conversion in this mode is similar to conversion in 8-channel mode
(hardware filter). The four ADCs of the module simultaneously convert channels 0, 2, 4 and
6. The ADCs first convert the channels with even numbers, and then the channels with the
odd numbers 1, 3, 5 and 7 (see the figure below.)
