 |
| Place of Origin: | Japan |
| Brand Name: | Tamagawa |
| Certification: | CE |
| Model Number: | TS5216N579 |
| Minimum Order Quantity: | 1pcs |
|---|---|
| Packaging Details: | carton |
| Delivery Time: | in stock |
| Payment Terms: | T/T, Western Union, MoneyGram |
| Supply Ability: | 100pcs/week |
| TAMAGAWA: | TAMAGAWA | Material: | Iron |
|---|---|---|---|
| Color: | Black | Temperature: | 40-120 |
| Japan: | Japan | TS5216N579: | TS5216N579 |
| Wire: | Wire |
TS5216N579AU6802N1
Guang Zhou Lai Jie Electric Co.,LTD
Please contact with “Tommy” for the price
TS5013N60
TS3641N22E7
TS5208N68
TS5210N450
TS4503N1202E200
TS3103N178
TS3664N2E4
TS5013N61
TS3641N2E3
TS5212N351
TS5210N453
TS4503N1205E200
TS3103N255
TS3664N50
TS5016N60
TS3641N12E3
TS5212N510
TS5210N458
TS4503N1828E100
TS3103N302
OAH14BSD
TS3667N1E2
TS5013N63
TS3641N32
TS5213N550
TS5210N530
TS4503N2000E100
TS3103N40
OAS66
TS3667N11E2
TS5016N61
TS3641N38
TS5213N551
TS5210N54
TS4503N2070E100
TS3132N32
OAS66
TS1857N16EP
TS3667N2E5
TS5016N63
TS3643N2
TS5308N510
TS20E12
TS4503N2202E200
TS3134N21
TS3667N2E6
TS5016N64
TS3643N212E5
TS530N33E9
TS2151N121E9
TS4503N2036E501
TS3134N22
OIS1000CT3L5V108
TS3667N3E7
TS5017N60
TS3643N233E8
TS5312-N250
TS2151N141E9
TS4506N1202E200
TS3134N317
OSE10243158
TS3667N3E8
TS5019N60
TS3653N11E2
TS5313N122
TS2228N33E1
TS4507N1002E200
TS3134N52
OSE5K-6-12-108
TS3667N13E8
TS5013N68
TS3653N12E5
TS5320N632
TS2640N141E172
TS4507N1202E200
OSE5KN-6-12-108
TS3674N37
TS5013N69
TS3653N13E8
TS5420
TS2640N181E100
TS4507N1205E200
TS3166N43
TS3679N2E1
TS5208N131
TS3653N1E1
| The number of calibration steps completed thus far | The calibration value currently being determined by the module Instructions |
| The number of calibration steps which still need to be carried out for the channel to be | The "Instructions" field indicates which actions the user has to personally carry out for the |
| fully calibrated | urrently active calibration step. Perform the actions indicated here and confirm by pressing |
the "Continue" button. The module now executes the actions required for the currently active
calibration step. If this step is processed without a fault, the function proceeds to the next
calibration step.
If you want to avoid recording existing calibration values again during user calibration,
confirm the currently active calibration step by pressing the "Skip this step" button (rather
than "Continue"). In this case, the factory-set calibration value is used for the calibration step
which has been skipped (see "Comment" field).
New calibration values
② Cancels the calibration function completely
③ Cancels the currently active calibration and returns to the calibration start screen
④ Confirms the determined calibration values, saves the values, and returns to the calibration
start screen
Figure 6-40 User-calibration values
You can now adopt these calibration values as the new values for this channel by pressing
the "Continue" button. The calibration values are saved retentively and the channel
calibration is complete.
If you do not want to use the displayed calibration values, you can either return to the start
screen and start a new calibration procedure by pressing the "Restart" button, or exit
calibration altogether by pressing the "Cancel" button.
6AG1332-5HF00-2AB0
Properties
● 8 outputs in one group
● The output can be selected by individual channel
– Voltage output
– Current output
● Resolution 12 bits
● Programmable diagnostics and diagnostic interrupt
● Programmable diagnostic interrupt
● Electrically isolated from the backplane bus interface and load voltage
● Supports parameter reassignment in RUN
Diagnostics
For information on diagnostics messages at the "group diagnostics" parameter, refer to
chapter Diagnostic messages of analog output modules (Page 296).
Terminal assignment
The diagrams below show various wiring options. These examples apply to all channels
(channel 0 to 7).
Note
When you switch the rated load voltage (L+) off and on, the outputs can return incorrect
voltage/current values for the duration of about 500 ms.
The following image depicts:
● 2-wire connection, no compensation for line impedance and
● 4-wire connection with compensation for line impedance
Supports parameter reassignment in RUN Yes
Reaction of non-programmed outputs Return the output value which was valid before the
parameterization
Supports isochronous mode no
Number of inputs 8
Cable length
• shielded max. 200 m
Voltages, currents, electrical potentials
Rated load voltage L+
• Reverse polarity protection
24 V DC
yes
• Electrical isolation
• between channels and the backplane bus
• between channels and electronics power supply
• between channels
• between channels and load voltage L+
yes
yes
no
yes
Maximum potential difference
• between S- and MANA (CMV) 3 V DC
Isolation test voltage 500 V DC
Current consumption
• from the backplane bus
• From supply voltage L+
max. 100 mA
max. 340 mA
Power loss of the module typ. 6.0 W
Generation of analog values
Resolution, including sign
• ± 10 V; ± 20 mA; 4 mA to 20 mA; 1 V to 5 V
• 0 V to 10 V; 0 mA to 20 mA;
• Conversion time (per channel)
11 bits + sign
12 Bit max.
0.8 ms
Transient recovery time
• with resistive load
• with capacitive load
• with inductive load
0.2 ms
3.3 ms
